SanDisk Optimus GX PRO 850X 1TB M.2 2280-D5-M internal SSD SDSP81100TAH-000E0
- Internal Solid Stat…
- M.2 2280-D5-M
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
SanDisk
1TB M.2 2280 NVMe 1.4 SSD with PCIe 4.0 x4 delivering 7300 MB/s read and 6300 MB/s write plus 800,000 random read IOPS
Capacity 1TB
The SanDisk Optimus GX PRO 850X is a 1TB internal SSD built for gaming PCs and creator workstations. It uses the M.2 2280 form factor with a PCIe 4.0 x4 interface and NVMe 1.4 protocol. 3D NAND TLC memory provides the storage foundation for demanding workloads.
This drive delivers maximum sequential read speeds of 7300 MBps and maximum sequential write speeds of 6300 MBps. Random read reaches 800000 IOPS while random write hits 1100000 IOPS. These figures decide if the drive matches your throughput requirements.
The SSD operates between 0°C and 85°C without a heatsink. Average active power draw is 7.2W during reads and 6.2W during writes. Idle consumption sits at 5 mW. Endurance is rated at 600 TBW with an MTBF of 1750000 hours.
| Brand | SanDisk |
|---|---|
| Series | Optimus GX PRO 850X |
| Model | SDSP81100TAN-000E0 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280-S3-M |
| Capacity | 1TB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Up to 7300 MBps |
| Max Sequential Write | Up to 6300 MBps |
| 4KB Random Read | Up to 800,000 IOPS |
| 4KB Random Write | Up to 1,100,000 IOPS |
| Terabytes Written (TBW) | 600TB |
| MTBF | 1,750,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | Average Active Power Read: 7.2W Average Active Power Write: 6.2W |
| Operating Temperature | 0°C ~ +85°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G @ 0.5 ms half-sine |
| Max Vibration Resistance | Operating Vibration: 5 gRMS, 10-2000 Hz, 3 axes Non-operating Vibration: 4.9 gRMS, 7-800 Hz, 3 axes |
| Height | 2.38mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 7.5g |
| Peso di spedizione | 0.05 kg |
| Dimensioni del pacco | 127 × 102 × 1 mm |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The 7300 MBps figure is the peak PCIe 4.0 x4 throughput for large-file transfers such as game loads or video scrubbing; real-world speeds depend on system cooling, workload and firmware.
The four-lane Gen 4 link caps sequential throughput at the drive's rated 7300 MBps read and 6300 MBps write; older PCIe 3.0 slots will halve that ceiling.
The single-sided 2280 form factor fits standard M.2 key-M slots in laptops and desktops; no heatsink is included, so verify clearance if your board has a tight cover.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?