Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small green circuit board with 40-pin IDE connector and SATA port, plus 7-pin SATA data cable

SMUGDESK

SMUGDESK IDE/PATA 40Pin to SATA Female PCBA Converter Adapter 3.5" with 7Pin SATA Data Cable

SKU CH-ETNN-QMM7C

Converts a 40-pin IDE/PATA 3.5" drive to SATA with an included data cable for legacy data recovery

  • Converts 40pin IDE drives to SATA interface
  • Included 7pin SATA cable connects directly to motherboard
  • Compact bare PCBA fits easily inside desktop chassis
  • Plugandplay operation requires no driver installation
  • Enables data recovery from legacy 3.5inch PATA drives

Legacy IDE to SATA adapter for 3.5 drives

This SMUGDESK converter board translates a 40pin parallel IDE interface into a standard SATA female connector, letting you connect a vintage 3.5inch PATA hard drive to a modern motherboard. A 7pin SATA data cable is included for a direct link to the board data port. The compact bare PCBA design fits easily inside a desktop chassis and requires no driver installation.

Upgrade from direct IDE cabling or USB docks

The adapter replaces a legacy IDE ribbon cable or an external USB enclosure when you only need to read or archive data from an existing 3.5inch PATA drive. The jump is worthwhile when the motherboard lacks an IDE header but still offers a free SATA port and a spare Molex power connector for the drive.

Practical limits of the SATA data interface

The board passes data through the SATA link but does not supply power; the drive must still receive 4pin Molex power from the PC power unit. Signal conversion is limited to the parallel PATA protocol, so the drive operates at its native PATA transfer rate rather than native SATA speed. Compatibility is restricted to standard 40pin IDE drives.

Puncte forte

  • Converts 40pin IDE drives to SATA interface
  • Included 7pin SATA cable connects directly to motherboard
  • Compact bare PCBA fits easily inside desktop chassis
  • Plugandplay operation requires no driver installation
  • Enables data recovery from legacy 3.5inch PATA drives

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

Does the 40-pin IDE converter board fit inside a standard 3.5-inch drive bay?

The compact bare PCBA design is small enough to sit inside a desktop chassis alongside a 3.5-inch drive, but it does not mount to the bay rails itself.

Which step do builders often miss when wiring the 40-pin IDE to SATA adapter?

Connecting the separate 4-pin Molex power lead to the IDE hard drive is essential; the board only passes data signals.

What will need replacement if the bundled 7-pin SATA data cable fails later?

Only the 7-pin SATA data cable would need swapping; the converter board itself has no moving parts or wear items.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.