暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small green circuit board with 40-pin IDE connector and SATA port, plus 7-pin SATA data cable

SMUGDESK

SMUGDESK IDE/PATA 40Pin to SATA Female PCBA Converter Adapter 3.5" with 7Pin SATA Data Cable

SKU CH-ETNN-QMM7C

Converts a 40-pin IDE/PATA 3.5" drive to SATA with an included data cable for legacy data recovery

  • Converts 40pin IDE drives to SATA interface
  • Included 7pin SATA cable connects directly to motherboard
  • Compact bare PCBA fits easily inside desktop chassis
  • Plugandplay operation requires no driver installation
  • Enables data recovery from legacy 3.5inch PATA drives

Legacy IDE to SATA adapter for 3.5 drives

This SMUGDESK converter board translates a 40pin parallel IDE interface into a standard SATA female connector, letting you connect a vintage 3.5inch PATA hard drive to a modern motherboard. A 7pin SATA data cable is included for a direct link to the board data port. The compact bare PCBA design fits easily inside a desktop chassis and requires no driver installation.

Upgrade from direct IDE cabling or USB docks

The adapter replaces a legacy IDE ribbon cable or an external USB enclosure when you only need to read or archive data from an existing 3.5inch PATA drive. The jump is worthwhile when the motherboard lacks an IDE header but still offers a free SATA port and a spare Molex power connector for the drive.

Practical limits of the SATA data interface

The board passes data through the SATA link but does not supply power; the drive must still receive 4pin Molex power from the PC power unit. Signal conversion is limited to the parallel PATA protocol, so the drive operates at its native PATA transfer rate rather than native SATA speed. Compatibility is restricted to standard 40pin IDE drives.

特長

  • Converts 40pin IDE drives to SATA interface
  • Included 7pin SATA cable connects directly to motherboard
  • Compact bare PCBA fits easily inside desktop chassis
  • Plugandplay operation requires no driver installation
  • Enables data recovery from legacy 3.5inch PATA drives

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the 40-pin IDE converter board fit inside a standard 3.5-inch drive bay?

The compact bare PCBA design is small enough to sit inside a desktop chassis alongside a 3.5-inch drive, but it does not mount to the bay rails itself.

Which step do builders often miss when wiring the 40-pin IDE to SATA adapter?

Connecting the separate 4-pin Molex power lead to the IDE hard drive is essential; the board only passes data signals.

What will need replacement if the bundled 7-pin SATA data cable fails later?

Only the 7-pin SATA data cable would need swapping; the converter board itself has no moving parts or wear items.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。