Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Small green circuit board with 40-pin IDE connector and SATA port, plus 7-pin SATA data cable

SMUGDESK

SMUGDESK IDE/PATA 40Pin to SATA Female PCBA Converter Adapter 3.5" with 7Pin SATA Data Cable

SKU CH-ETNN-QMM7C

Converts a 40-pin IDE/PATA 3.5" drive to SATA with an included data cable for legacy data recovery

  • Converts 40pin IDE drives to SATA interface
  • Included 7pin SATA cable connects directly to motherboard
  • Compact bare PCBA fits easily inside desktop chassis
  • Plugandplay operation requires no driver installation
  • Enables data recovery from legacy 3.5inch PATA drives

Legacy IDE to SATA adapter for 3.5 drives

This SMUGDESK converter board translates a 40pin parallel IDE interface into a standard SATA female connector, letting you connect a vintage 3.5inch PATA hard drive to a modern motherboard. A 7pin SATA data cable is included for a direct link to the board data port. The compact bare PCBA design fits easily inside a desktop chassis and requires no driver installation.

Upgrade from direct IDE cabling or USB docks

The adapter replaces a legacy IDE ribbon cable or an external USB enclosure when you only need to read or archive data from an existing 3.5inch PATA drive. The jump is worthwhile when the motherboard lacks an IDE header but still offers a free SATA port and a spare Molex power connector for the drive.

Practical limits of the SATA data interface

The board passes data through the SATA link but does not supply power; the drive must still receive 4pin Molex power from the PC power unit. Signal conversion is limited to the parallel PATA protocol, so the drive operates at its native PATA transfer rate rather than native SATA speed. Compatibility is restricted to standard 40pin IDE drives.

I korthet

  • Converts 40pin IDE drives to SATA interface
  • Included 7pin SATA cable connects directly to motherboard
  • Compact bare PCBA fits easily inside desktop chassis
  • Plugandplay operation requires no driver installation
  • Enables data recovery from legacy 3.5inch PATA drives

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

Does the 40-pin IDE converter board fit inside a standard 3.5-inch drive bay?

The compact bare PCBA design is small enough to sit inside a desktop chassis alongside a 3.5-inch drive, but it does not mount to the bay rails itself.

Which step do builders often miss when wiring the 40-pin IDE to SATA adapter?

Connecting the separate 4-pin Molex power lead to the IDE hard drive is essential; the board only passes data signals.

What will need replacement if the bundled 7-pin SATA data cable fails later?

Only the 7-pin SATA data cable would need swapping; the converter board itself has no moving parts or wear items.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.