Solidigm
Solidigm D3-S4620 960GB 2.5" SATA Enterprise SSD SSDSC2KG960GZ01
- 2.5"
- 960GB
1.161,99 USD
0.01459493BTC
În stoc
Solidigm
Solidigm D3-S4620 480GB 2.5" SATA enterprise SSD SSDSC2KG480GZ01
A 480 GB 2.5 inch SATA enterprise SSD built with 144L TLC 3D NAND for read-intensive server workloads, delivering up to 550 MBps sequential read and 500 MBps sequential write
- Form Factor2.5"
- Capacity480GB
- Memory Components144L TLC 3D NAND
- InterfaceSATA III
- Max Sequential ReadUp to 550 MBps
- Max Sequential WriteUp to 500 MBps
Options 480GB 2.5"
- 3.84TB 2.5"
- 1.92TB 2.5"
- 960GB 2.5"
- 480GB 2.5"
Versiunile tăiate există, dar nu sunt disponibile aici.
- Consistent data-centre performance from 144-layer 3D TLC NAND
- Sustained sequential reads up to 550 MBps for fast data access
- Sequential writes up to 500 MBps keep workloads moving
- 5-inch SATA form factor fits standard server bays
- 480 GB capacity scales to 3.84 TB for storage density
Solidigm D3-S4620 480GB SATA Enterprise SSD
The Solidigm D3-S4620 is a 480GB 2.5-inch SATA solid-state drive built for data-centre and server deployments. It uses 144L TLC 3D NAND to deliver sequential reads up to 550 MBps and writes up to 500 MBps. The drive operates from 0°C to 70°C and withstands 1,000 G shock at 0.5 msec.
Suits read-intensive server workloads.
This mid-endurance drive targets read-intensive applications such as boot, web serving and content delivery where it boosts IOPS per terabyte over legacy hard disks. It is not suited for write-heavy caching tiers or high-endurance database logging that demand greater write cycles.
SATA III interface decides compatibility
The single specification that determines fit is the SATA III 6Gb/s interface; the drive slots into any 2.5-inch bay wired for SATA. Systems requiring PCIe or other interfaces cannot use this unit.
Puncte forte
- Consistent data-centre performance from 144-layer 3D TLC NAND
- Sustained sequential reads up to 550 MBps for fast data access
- Sequential writes up to 500 MBps keep workloads moving
- 5-inch SATA form factor fits standard server bays
- 480 GB capacity scales to 3.84 TB for storage density
Specificații
| Brand | Solidigm |
|---|---|
| Series | D3-S4620 |
| Model | D3-S4620 |
| Form Factor | 2.5" |
| Capacity | 480GB |
| Memory Components | 144L TLC 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 500 MBps |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Greutate la expediere | 0.23 kg |
| Dimensiunile coletului | 102 × 76 × 13 mm |
Alte versiuni ale acestui model
2 în plus din aceeași gamă
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
Solidigm
Solidigm D3-S4620 3.84TB 2.5" SATA enterprise SSD SSDSC2KG038TZ01
- 2.5"
- 3.84TB
3.685,99 USD
0.0462971BTC
În stocÎntrebări despre acest articol
How do I pick between the 480 GB and the 3.84 TB versions of the D3-S4620?
Choose the 480 GB model for boot drives or light read workloads; step up to larger capacities when you need more space for mixed read/write data sets.
What do the 550 MBps read and 500 MBps write figures mean once the drive is installed in a server?
They are peak sequential speeds measured under ideal conditions; real-world mixed workloads will run lower depending on queue depth and controller overhead.
What does the SATA 6 Gb/s interface limit in practice?
The 6 Gb/s link caps combined throughput near the drive's rated 550 MBps read and 500 MBps write, so the bus sets the ceiling for sustained transfers.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
