Solidigm
Solidigm D3-S4620 480GB 2.5" SATA enterprise SSD SSDSC2KG480GZ01
- 2.5"
- 480GB
929,99 USD
0.01170874BTC
În stoc
Solidigm
Solidigm D3-S4620 960GB 2.5" SATA Enterprise SSD SSDSC2KG960GZ01
A 960 GB 2.5" SATA enterprise SSD with 144-layer TLC 3D NAND delivering up to 550 MB/s reads and 510 MB/s writes
- Form Factor2.5"
- Capacity960GB
- Memory Components144L TLC 3D NAND
- InterfaceSATA III
- Max Sequential ReadUp to 550 MBps
- Max Sequential WriteUp to 510 MBps
Options 960GB 2.5"
- 3.84TB 2.5"
- 1.92TB 2.5"
- 960GB 2.5"
- 480GB 2.5"
Versiunile tăiate există, dar nu sunt disponibile aici.
- Enterprise SATA SSD delivers 550 MBps sequential read speed
- 510 MBps sequential write accelerates write-heavy workloads
- 144-layer TLC 3D NAND enables 960 GB capacity in 2.5" form factor
- 1,000 G shock resistance protects data in dense server racks
- Operating temperature range 0 °C to 70 °C suits data-centre environments
960 GB 2.5" SATA enterprise drive
The Solidigm D3-S4620 is a 960 GB solid-state drive in a 2.5 inch form factor with a SATA III interface. It uses 144-layer TLC 3D NAND and is built for data-centre and server workloads. The drive is supplied new and was formerly manufactured by Intel Corporation.
Suited for read-intensive server tiers.
This mid-endurance model targets read-intensive applications such as boot, logging and content delivery where it raises IOPS per terabyte over hard drives. It is not designed for workloads that demand sustained high write throughput or higher drive writes per day ratings. Buyers needing greater write endurance should consider a different endurance class.
Sequential read up to 550 MB/s
The key specification is the maximum sequential read speed of up to 550 MBps and maximum sequential write speed of up to 510 MBps over SATA III. These figures determine whether the drive meets the throughput requirements of the intended server or storage array.
Puncte forte
- Enterprise SATA SSD delivers 550 MBps sequential read speed
- 510 MBps sequential write accelerates write-heavy workloads
- 144-layer TLC 3D NAND enables 960 GB capacity in 2.5" form factor
- 1,000 G shock resistance protects data in dense server racks
- Operating temperature range 0 °C to 70 °C suits data-centre environments
Specificații
| Brand | Solidigm |
|---|---|
| Model | D3-S4620 |
| Part Number | SSDSC2KG960GZ01 |
| Form Factor | 2.5" |
| Capacity | 960GB |
| Memory Components | 144L TLC 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 510 MBps |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Greutate la expediere | 0.23 kg |
| Dimensiunile coletului | 102 × 76 × 13 mm |
Alte versiuni ale acestui model
2 în plus din aceeași gamă
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
Solidigm
Solidigm D3-S4620 3.84TB 2.5" SATA enterprise SSD SSDSC2KG038TZ01
- 2.5"
- 3.84TB
3.685,99 USD
0.04640727BTC
În stocÎntrebări despre acest articol
How do I confirm the drive is healthy after installation?
Check SMART data for zero reallocated sectors and verify sequential read and write speeds reach up to 550 MBps and 510 MBps respectively.
What comes in the single pack and what must be sourced separately?
The pack contains only the 2.5 inch drive; a SATA data cable, power cable and mounting bracket are not included.
Which capacity should I choose for a mid-endurance server workload?
The 960 GB model delivers up to 550 MBps read and 510 MBps write; larger capacities up to 3.84 TB are available in the same series.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
