Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Rectangular silver 2.5 inch SATA SSD with label showing 960GB capacity

Solidigm

Solidigm D3-S4620 960GB 2.5" SATA Enterprise SSD SSDSC2KG960GZ01

SKU CH-F0DH-H2TFJ MPN SSDSC2KG960GZ01

A 960 GB 2.5" SATA enterprise SSD with 144-layer TLC 3D NAND delivering up to 550 MB/s reads and 510 MB/s writes

  • Form Factor2.5"
  • Capacity960GB
  • Memory Components144L TLC 3D NAND
  • InterfaceSATA III
  • Max Sequential ReadUp to 550 MBps
  • Max Sequential WriteUp to 510 MBps

Options 960GB 2.5"

Genomstrukna varianter finns, men är inte i lager här.

  • Enterprise SATA SSD delivers 550 MBps sequential read speed
  • 510 MBps sequential write accelerates write-heavy workloads
  • 144-layer TLC 3D NAND enables 960 GB capacity in 2.5" form factor
  • 1,000 G shock resistance protects data in dense server racks
  • Operating temperature range 0 °C to 70 °C suits data-centre environments

960 GB 2.5" SATA enterprise drive

The Solidigm D3-S4620 is a 960 GB solid-state drive in a 2.5 inch form factor with a SATA III interface. It uses 144-layer TLC 3D NAND and is built for data-centre and server workloads. The drive is supplied new and was formerly manufactured by Intel Corporation.

Suited for read-intensive server tiers.

This mid-endurance model targets read-intensive applications such as boot, logging and content delivery where it raises IOPS per terabyte over hard drives. It is not designed for workloads that demand sustained high write throughput or higher drive writes per day ratings. Buyers needing greater write endurance should consider a different endurance class.

Sequential read up to 550 MB/s

The key specification is the maximum sequential read speed of up to 550 MBps and maximum sequential write speed of up to 510 MBps over SATA III. These figures determine whether the drive meets the throughput requirements of the intended server or storage array.

I korthet

  • Enterprise SATA SSD delivers 550 MBps sequential read speed
  • 510 MBps sequential write accelerates write-heavy workloads
  • 144-layer TLC 3D NAND enables 960 GB capacity in 2.5" form factor
  • 1,000 G shock resistance protects data in dense server racks
  • Operating temperature range 0 °C to 70 °C suits data-centre environments

Specifikationer

BrandSolidigm
ModelD3-S4620
Part NumberSSDSC2KG960GZ01
Form Factor2.5"
Capacity960GB
Memory Components144L TLC 3D NAND
InterfaceSATA III
Max Sequential ReadUp to 550 MBps
Max Sequential WriteUp to 510 MBps
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Fraktvikt0.23 kg
Paketstorlek102 × 76 × 13 mm

Andra versioner av den här modellen

2 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How do I confirm the drive is healthy after installation?

Check SMART data for zero reallocated sectors and verify sequential read and write speeds reach up to 550 MBps and 510 MBps respectively.

What comes in the single pack and what must be sourced separately?

The pack contains only the 2.5 inch drive; a SATA data cable, power cable and mounting bracket are not included.

Which capacity should I choose for a mid-endurance server workload?

The 960 GB model delivers up to 550 MBps read and 510 MBps write; larger capacities up to 3.84 TB are available in the same series.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.