Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Standalone duplicator with LCD and seven M.2 slots

Systor

Systor 1-to-7 SATA & NVMe Duplicator SYSNVME-NX407

SKU CH-SR7R-43J92

Standalone duplicator copies or sanitises up to seven SATA and NVMe M.2 drives at 24 GB per minute

  • Target1 to 7
  • Display20 x 2 LCD
  • Operating TypeStandalone

TARGET SIZE 1 to 07

  • Standalone operation requires no computer or software
  • Copies up to seven targets simultaneously at 24 GB per minute
  • Supports SATA and NVMe M.2 drives in sizes 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080, 22110
  • Erases data with Quick, Full, Secure, DoD 5220.22-M or NIST 800-88 compliant methods
  • Source port can be erased for efficient sanitisation and testing

Standalone 1-to-7 NVMe and SATA Duplicator

The Systor SYSNVME-NX407 copies or sanitises up to seven M.2 drives at once without a host PC. It accepts NVMe and SATA signal types automatically, handling drives from 2230 to 22110 form factors and capacities above 18TB. A 20 x 2 LCD guides every operation.

Replaces manual PC-based cloning

When you need to duplicate or wipe multiple drives in one session, this unit removes the bottleneck of one-at-a-time transfers. The jump is worth it for IT teams, labs or evidence units that process batches daily and require NIST 800-88 or DoD 5220.22-M compliant sanitisation without software licences.

Check your drive keys

The duplicator supports M key, B+M key and SATA Express M.2 modules, but it does not accept 2.5-inch SATA drives or PCIe add-in cards. Verify that each target drive matches the listed form factors (2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080, 22110) and that your bench power can sustain seven simultaneous write loads.

Puncte forte

  • Standalone operation requires no computer or software
  • Copies up to seven targets simultaneously at 24 GB per minute
  • Supports SATA and NVMe M.2 drives in sizes 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080, 22110
  • Erases data with Quick, Full, Secure, DoD 5220.22-M or NIST 800-88 compliant methods
  • Source port can be erased for efficient sanitisation and testing

Specificații

Target1 to 7
Display20 x 2 LCD
Operating TypeStandalone

Alte versiuni ale acestui model

4 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What M.2 form-factor lengths does the duplicator accept?

The unit supports 2230, 2242, 2260, 2280, 22110, 3030, 3042, 3060 and 3080 M.2 sizes across both SATA and NVMe drives.

How do I start a copy job on the standalone duplicator?

Insert the source drive into the master slot, load up to seven target drives, select the copy mode on the 20 x 2 LCD menu and press the start button; the process runs without a PC.

Which erase standards can I choose for later drive sanitisation?

Quick Erase, Full Erase, Secure Erase (NIST 800-88), DoD Erase (DoD 5220.22-M) and DoD Erase + Compare are all available from the front panel.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.