Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Standalone duplicator with LCD and seven M.2 slots

Systor

Systor 1-to-7 SATA & NVMe Duplicator SYSNVME-NX407

SKU CH-SR7R-43J92

Standalone duplicator copies or sanitises up to seven SATA and NVMe M.2 drives at 24 GB per minute

  • Target1 to 7
  • Display20 x 2 LCD
  • Operating TypeStandalone

TARGET SIZE 1 to 07

  • Standalone operation requires no computer or software
  • Copies up to seven targets simultaneously at 24 GB per minute
  • Supports SATA and NVMe M.2 drives in sizes 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080, 22110
  • Erases data with Quick, Full, Secure, DoD 5220.22-M or NIST 800-88 compliant methods
  • Source port can be erased for efficient sanitisation and testing

Standalone 1-to-7 NVMe and SATA Duplicator

The Systor SYSNVME-NX407 copies or sanitises up to seven M.2 drives at once without a host PC. It accepts NVMe and SATA signal types automatically, handling drives from 2230 to 22110 form factors and capacities above 18TB. A 20 x 2 LCD guides every operation.

Replaces manual PC-based cloning

When you need to duplicate or wipe multiple drives in one session, this unit removes the bottleneck of one-at-a-time transfers. The jump is worth it for IT teams, labs or evidence units that process batches daily and require NIST 800-88 or DoD 5220.22-M compliant sanitisation without software licences.

Check your drive keys

The duplicator supports M key, B+M key and SATA Express M.2 modules, but it does not accept 2.5-inch SATA drives or PCIe add-in cards. Verify that each target drive matches the listed form factors (2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080, 22110) and that your bench power can sustain seven simultaneous write loads.

Prednosti

  • Standalone operation requires no computer or software
  • Copies up to seven targets simultaneously at 24 GB per minute
  • Supports SATA and NVMe M.2 drives in sizes 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080, 22110
  • Erases data with Quick, Full, Secure, DoD 5220.22-M or NIST 800-88 compliant methods
  • Source port can be erased for efficient sanitisation and testing

Špecifikácie

Target1 to 7
Display20 x 2 LCD
Operating TypeStandalone

Ďalšie verzie tohto modelu

Ďalších 4 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What M.2 form-factor lengths does the duplicator accept?

The unit supports 2230, 2242, 2260, 2280, 22110, 3030, 3042, 3060 and 3080 M.2 sizes across both SATA and NVMe drives.

How do I start a copy job on the standalone duplicator?

Insert the source drive into the master slot, load up to seven target drives, select the copy mode on the 20 x 2 LCD menu and press the start button; the process runs without a PC.

Which erase standards can I choose for later drive sanitisation?

Quick Erase, Full Erase, Secure Erase (NIST 800-88), DoD Erase (DoD 5220.22-M) and DoD Erase + Compare are all available from the front panel.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.