저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Standalone duplicator with LCD and seven M.2 slots

Systor

Systor 1-to-7 SATA & NVMe Duplicator SYSNVME-NX407

SKU CH-SR7R-43J92

Standalone duplicator copies or sanitises up to seven SATA and NVMe M.2 drives at 24 GB per minute

  • Target1 to 7
  • Display20 x 2 LCD
  • Operating TypeStandalone

TARGET SIZE 1 to 07

  • Standalone operation requires no computer or software
  • Copies up to seven targets simultaneously at 24 GB per minute
  • Supports SATA and NVMe M.2 drives in sizes 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080, 22110
  • Erases data with Quick, Full, Secure, DoD 5220.22-M or NIST 800-88 compliant methods
  • Source port can be erased for efficient sanitisation and testing

Standalone 1-to-7 NVMe and SATA Duplicator

The Systor SYSNVME-NX407 copies or sanitises up to seven M.2 drives at once without a host PC. It accepts NVMe and SATA signal types automatically, handling drives from 2230 to 22110 form factors and capacities above 18TB. A 20 x 2 LCD guides every operation.

Replaces manual PC-based cloning

When you need to duplicate or wipe multiple drives in one session, this unit removes the bottleneck of one-at-a-time transfers. The jump is worth it for IT teams, labs or evidence units that process batches daily and require NIST 800-88 or DoD 5220.22-M compliant sanitisation without software licences.

Check your drive keys

The duplicator supports M key, B+M key and SATA Express M.2 modules, but it does not accept 2.5-inch SATA drives or PCIe add-in cards. Verify that each target drive matches the listed form factors (2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080, 22110) and that your bench power can sustain seven simultaneous write loads.

주요 특징

  • Standalone operation requires no computer or software
  • Copies up to seven targets simultaneously at 24 GB per minute
  • Supports SATA and NVMe M.2 drives in sizes 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080, 22110
  • Erases data with Quick, Full, Secure, DoD 5220.22-M or NIST 800-88 compliant methods
  • Source port can be erased for efficient sanitisation and testing

사양

Target1 to 7
Display20 x 2 LCD
Operating TypeStandalone

이 모델의 다른 버전

같은 라인업에서 4개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What M.2 form-factor lengths does the duplicator accept?

The unit supports 2230, 2242, 2260, 2280, 22110, 3030, 3042, 3060 and 3080 M.2 sizes across both SATA and NVMe drives.

How do I start a copy job on the standalone duplicator?

Insert the source drive into the master slot, load up to seven target drives, select the copy mode on the 20 x 2 LCD menu and press the start button; the process runs without a PC.

Which erase standards can I choose for later drive sanitisation?

Quick Erase, Full Erase, Secure Erase (NIST 800-88), DoD Erase (DoD 5220.22-M) and DoD Erase + Compare are all available from the front panel.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.