저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Systor standalone duplicator unit with LCD screen and multiple M.2 slots

Systor

Systor 1-to-3 SATA & NVMe Duplicator 24GB/min SYSNVME-NX403

SKU CH-3EH0-B18JE

Standalone duplicator copies or sanitises up to three SATA or NVMe drives at 24 GB per minute with a 20 x 2 LCD

  • Target1 to 3
  • Display20 x 2 LCD
  • Operating TypeStandalone

TARGET SIZE 1 to 03

  • Standalone operation needs no computer or software
  • Copies up to three targets at 24 GB per minute
  • Supports SATA and NVMe M.2 drives up to 18 TB
  • Multiple erase modes including NIST 800-88 and DoD 5220.22-M
  • 20 x 2 LCD shows status for every copy or erase job

Standalone NVMe & SATA duplicator

The Systor SYSNVME-NX403 is a standalone duplicator that copies or erases one source drive onto up to three target drives without a host computer. It accepts NVMe and SATA M.2 modules in sizes from 2230 to 22110 and handles capacities beyond 18TB. The unit is aimed at IT departments, forensic labs and data-centre teams that need reliable, software-free duplication and sanitisation.

Front-panel operation with LCD status

A 20 x 2 character LCD and push-button menu let you start copy, compare or erase jobs in seconds. Drives slot into the top-loading bays; no screws or adapters are required for supported M-key, B+M-key or SATA Express form factors. The most common issue is a target drive smaller than the source image, which halts the copy — verify capacity parity before starting.

Check drive interfaces and erase standards needed

Confirm that every source and target drive uses a SATA or NVMe interface listed in the specifications; other protocols are not supported. Decide which erase method matches your compliance requirements: Quick Erase, Full Erase, Secure Erase (NIST 800-88), DoD 5220.22-M or DoD Erase + Compare. The source port can also be erased directly when sanitisation of the master is required.

주요 특징

  • Standalone operation needs no computer or software
  • Copies up to three targets at 24 GB per minute
  • Supports SATA and NVMe M.2 drives up to 18 TB
  • Multiple erase modes including NIST 800-88 and DoD 5220.22-M
  • 20 x 2 LCD shows status for every copy or erase job

사양

Target1 to 3
Display20 x 2 LCD
Operating TypeStandalone

이 모델의 다른 버전

같은 라인업에서 4개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I confirm the duplicator is copying at the rated 24GB/min speed after setup?

Watch the 20 x 2 LCD during a copy session; it reports real-time transfer rate so you can verify performance matches the 24GB/min specification.

Which drives and accessories are included with the SYSNVME-NX403 and what must I supply?

The unit itself is included; you must provide the source NVMe or SATA M.2 drive and up to three target M.2 drives in sizes such as 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080 or 22110.

Which M.2 form factors should I choose to ensure compatibility with the duplicator?

Select M.2 drives in 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080 or 22110 sizes; the duplicator accepts both NVMe and SATA signal types across these form factors.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.