Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Systor standalone duplicator unit with LCD screen and multiple M.2 slots

Systor

Systor 1-to-3 SATA & NVMe Duplicator 24GB/min SYSNVME-NX403

SKU CH-3EH0-B18JE

Standalone duplicator copies or sanitises up to three SATA or NVMe drives at 24 GB per minute with a 20 x 2 LCD

  • Target1 to 3
  • Display20 x 2 LCD
  • Operating TypeStandalone

TARGET SIZE 1 to 03

  • Standalone operation needs no computer or software
  • Copies up to three targets at 24 GB per minute
  • Supports SATA and NVMe M.2 drives up to 18 TB
  • Multiple erase modes including NIST 800-88 and DoD 5220.22-M
  • 20 x 2 LCD shows status for every copy or erase job

Standalone NVMe & SATA duplicator

The Systor SYSNVME-NX403 is a standalone duplicator that copies or erases one source drive onto up to three target drives without a host computer. It accepts NVMe and SATA M.2 modules in sizes from 2230 to 22110 and handles capacities beyond 18TB. The unit is aimed at IT departments, forensic labs and data-centre teams that need reliable, software-free duplication and sanitisation.

Front-panel operation with LCD status

A 20 x 2 character LCD and push-button menu let you start copy, compare or erase jobs in seconds. Drives slot into the top-loading bays; no screws or adapters are required for supported M-key, B+M-key or SATA Express form factors. The most common issue is a target drive smaller than the source image, which halts the copy — verify capacity parity before starting.

Check drive interfaces and erase standards needed

Confirm that every source and target drive uses a SATA or NVMe interface listed in the specifications; other protocols are not supported. Decide which erase method matches your compliance requirements: Quick Erase, Full Erase, Secure Erase (NIST 800-88), DoD 5220.22-M or DoD Erase + Compare. The source port can also be erased directly when sanitisation of the master is required.

Najważniejsze cechy

  • Standalone operation needs no computer or software
  • Copies up to three targets at 24 GB per minute
  • Supports SATA and NVMe M.2 drives up to 18 TB
  • Multiple erase modes including NIST 800-88 and DoD 5220.22-M
  • 20 x 2 LCD shows status for every copy or erase job

Specyfikacja

Target1 to 3
Display20 x 2 LCD
Operating TypeStandalone

Inne wersje tego modelu

Jeszcze 4 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

How do I confirm the duplicator is copying at the rated 24GB/min speed after setup?

Watch the 20 x 2 LCD during a copy session; it reports real-time transfer rate so you can verify performance matches the 24GB/min specification.

Which drives and accessories are included with the SYSNVME-NX403 and what must I supply?

The unit itself is included; you must provide the source NVMe or SATA M.2 drive and up to three target M.2 drives in sizes such as 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080 or 22110.

Which M.2 form factors should I choose to ensure compatibility with the duplicator?

Select M.2 drives in 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080 or 22110 sizes; the duplicator accepts both NVMe and SATA signal types across these form factors.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.