We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Systor standalone duplicator unit with LCD screen and multiple M.2 slots

Systor

Systor 1-to-3 SATA & NVMe Duplicator 24GB/min SYSNVME-NX403

SKU CH-3EH0-B18JE

Standalone duplicator copies or sanitises up to three SATA or NVMe drives at 24 GB per minute with a 20 x 2 LCD

  • Target1 to 3
  • Display20 x 2 LCD
  • Operating TypeStandalone

TARGET SIZE 1 to 03

  • Standalone operation needs no computer or software
  • Copies up to three targets at 24 GB per minute
  • Supports SATA and NVMe M.2 drives up to 18 TB
  • Multiple erase modes including NIST 800-88 and DoD 5220.22-M
  • 20 x 2 LCD shows status for every copy or erase job

Standalone NVMe & SATA duplicator

The Systor SYSNVME-NX403 is a standalone duplicator that copies or erases one source drive onto up to three target drives without a host computer. It accepts NVMe and SATA M.2 modules in sizes from 2230 to 22110 and handles capacities beyond 18TB. The unit is aimed at IT departments, forensic labs and data-centre teams that need reliable, software-free duplication and sanitisation.

Front-panel operation with LCD status

A 20 x 2 character LCD and push-button menu let you start copy, compare or erase jobs in seconds. Drives slot into the top-loading bays; no screws or adapters are required for supported M-key, B+M-key or SATA Express form factors. The most common issue is a target drive smaller than the source image, which halts the copy — verify capacity parity before starting.

Check drive interfaces and erase standards needed

Confirm that every source and target drive uses a SATA or NVMe interface listed in the specifications; other protocols are not supported. Decide which erase method matches your compliance requirements: Quick Erase, Full Erase, Secure Erase (NIST 800-88), DoD 5220.22-M or DoD Erase + Compare. The source port can also be erased directly when sanitisation of the master is required.

Highlights

  • Standalone operation needs no computer or software
  • Copies up to three targets at 24 GB per minute
  • Supports SATA and NVMe M.2 drives up to 18 TB
  • Multiple erase modes including NIST 800-88 and DoD 5220.22-M
  • 20 x 2 LCD shows status for every copy or erase job

Specifications

Target1 to 3
Display20 x 2 LCD
Operating TypeStandalone

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I confirm the duplicator is copying at the rated 24GB/min speed after setup?

Watch the 20 x 2 LCD during a copy session; it reports real-time transfer rate so you can verify performance matches the 24GB/min specification.

Which drives and accessories are included with the SYSNVME-NX403 and what must I supply?

The unit itself is included; you must provide the source NVMe or SATA M.2 drive and up to three target M.2 drives in sizes such as 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080 or 22110.

Which M.2 form factors should I choose to ensure compatibility with the duplicator?

Select M.2 drives in 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080 or 22110 sizes; the duplicator accepts both NVMe and SATA signal types across these form factors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.