Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 90-degree G1/4 compression fitting for 16mm OD PETG tube, 44.2 x 40.5 x 25mm, 22g

Thermaltake

Thermaltake CL-W097-CA00BL-A Pacific G14 90-Degree Compression 16mm OD

SKU CH-DC3Q-1HEZE

A 90-degree compression fitting connects 16 mm OD PETG tubing to G 1/4 threads in a custom liquid-cooling loop

  • TypeTubing
  • ColorBlack
  • Tube Dim.Dimension: 44.20 x 40.50 x 25.00 mm Applicable OD: 16mm (5/8
  • Tube MaterialCU
  • FeaturesWeight: 22.00g Screw Thread: G 1/4 Note: PETG Tube to G1/4
  • 90-degree angle routes tubing cleanly in tight spaces
  • G 1/4 thread fits standard water-cooling components
  • Copper construction resists corrosion for long-term reliability
  • 16 mm outer diameter matches common PETG tubing sizes
  • Weighs 22.00 g to keep loop weight low

Pacific G14 90-Degree Compression Fitting

The Thermaltake Pacific G14 is a rigid 90-degree compression fitting designed to join 16mm OD PETG tubing in custom liquid-cooling loops. Its copper body with a black finish connects to standard G 1/4 threads and measures 44.20 x 40.50 x 25.00 mm while weighing 22.00g.

Suited for fixed right-angle routing.

This fitting suits builders who need a permanent 90-degree turn between PETG tubes and G 1/4 ports. It is not for loops that require an adjustable rotary angle or a different fixed angle. It also does not suit soft tubing or tubing with an outer diameter other than 16mm.

16mm OD PETG to G 1/4 compatibility

The single specification that decides fit is the 16mm outer-diameter PETG tubing requirement paired with a G 1/4 screw thread. Verify that your tubing material and diameter match exactly before purchase.

Puncte forte

  • 90-degree angle routes tubing cleanly in tight spaces
  • G 1/4 thread fits standard water-cooling components
  • Copper construction resists corrosion for long-term reliability
  • 16 mm outer diameter matches common PETG tubing sizes
  • Weighs 22.00 g to keep loop weight low

Specificații

BrandThermaltake
ModelCL-W097-CA00BL-A
TypeTubing
ColorBlack
Tube Dim.Dimension: 44.20 x 40.50 x 25.00 mm
Applicable OD: 16mm (5/8")
Tube MaterialCU
FeaturesWeight: 22.00g
Screw Thread: G 1/4
Note: PETG Tube to G1/4

Întrebări despre acest articol

Will the 44.20 mm by 40.50 mm footprint of this 90-degree fitting clear my motherboard heatsinks?

The fitting body measures 44.20 mm long, 40.50 mm wide and 25.00 mm tall, so compare those dimensions to the space around your G 1/4 ports before ordering.

Does the G 1/4 thread on this compression fitting seal directly into a standard water-block port, or do I need an adapter?

It threads straight into any G 1/4 female port; hand-tighten then give a gentle quarter-turn with a wrench — the step most people skip is fully seating the 16 mm PETG tube against the internal stop before tightening the compression nut.

The fitting is listed as copper with a black finish; will the coating wear off if I disassemble the loop for maintenance later?

The black coating is applied over the copper body; repeated disassembly can scuff the finish at the compression nut, but the sealing surfaces and G 1/4 threads remain unaffected.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.