Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 90-degree G1/4 compression fitting for 16mm OD PETG tube, 44.2 x 40.5 x 25mm, 22g

Thermaltake

Thermaltake CL-W097-CA00BL-A Pacific G14 90-Degree Compression 16mm OD

SKU CH-DC3Q-1HEZE

A 90-degree compression fitting connects 16 mm OD PETG tubing to G 1/4 threads in a custom liquid-cooling loop

  • TypeTubing
  • ColorBlack
  • Tube Dim.Dimension: 44.20 x 40.50 x 25.00 mm Applicable OD: 16mm (5/8
  • Tube MaterialCU
  • FeaturesWeight: 22.00g Screw Thread: G 1/4 Note: PETG Tube to G1/4
  • 90-degree angle routes tubing cleanly in tight spaces
  • G 1/4 thread fits standard water-cooling components
  • Copper construction resists corrosion for long-term reliability
  • 16 mm outer diameter matches common PETG tubing sizes
  • Weighs 22.00 g to keep loop weight low

Pacific G14 90-Degree Compression Fitting

The Thermaltake Pacific G14 is a rigid 90-degree compression fitting designed to join 16mm OD PETG tubing in custom liquid-cooling loops. Its copper body with a black finish connects to standard G 1/4 threads and measures 44.20 x 40.50 x 25.00 mm while weighing 22.00g.

Suited for fixed right-angle routing.

This fitting suits builders who need a permanent 90-degree turn between PETG tubes and G 1/4 ports. It is not for loops that require an adjustable rotary angle or a different fixed angle. It also does not suit soft tubing or tubing with an outer diameter other than 16mm.

16mm OD PETG to G 1/4 compatibility

The single specification that decides fit is the 16mm outer-diameter PETG tubing requirement paired with a G 1/4 screw thread. Verify that your tubing material and diameter match exactly before purchase.

Poudarki

  • 90-degree angle routes tubing cleanly in tight spaces
  • G 1/4 thread fits standard water-cooling components
  • Copper construction resists corrosion for long-term reliability
  • 16 mm outer diameter matches common PETG tubing sizes
  • Weighs 22.00 g to keep loop weight low

Specifikacije

BrandThermaltake
ModelCL-W097-CA00BL-A
TypeTubing
ColorBlack
Tube Dim.Dimension: 44.20 x 40.50 x 25.00 mm
Applicable OD: 16mm (5/8")
Tube MaterialCU
FeaturesWeight: 22.00g
Screw Thread: G 1/4
Note: PETG Tube to G1/4

Vprašanja o tem izdelku

Will the 44.20 mm by 40.50 mm footprint of this 90-degree fitting clear my motherboard heatsinks?

The fitting body measures 44.20 mm long, 40.50 mm wide and 25.00 mm tall, so compare those dimensions to the space around your G 1/4 ports before ordering.

Does the G 1/4 thread on this compression fitting seal directly into a standard water-block port, or do I need an adapter?

It threads straight into any G 1/4 female port; hand-tighten then give a gentle quarter-turn with a wrench — the step most people skip is fully seating the 16 mm PETG tube against the internal stop before tightening the compression nut.

The fitting is listed as copper with a black finish; will the coating wear off if I disassemble the loop for maintenance later?

The black coating is applied over the copper body; repeated disassembly can scuff the finish at the compression nut, but the sealing surfaces and G 1/4 threads remain unaffected.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.