Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 92x38mm case fan with three-pin connector and ball bearing

Zyvpee

Zyvpee 3612KL-04W-B66 92x38mm 12V 0.68A 3 Pin Ball Bearing Case Fan

SKU CH-JJKN-4EX0H

A 92 x 38 mm ball-bearing case fan running at 12 V and 0.68 A with a three-pin connector and temperature sensor for server cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesServer Cooling
  • Ball bearing motor reduces friction for longer service life
  • 12 V 0.68 A power draw keeps energy use low
  • 92 x 38 mm frame fits standard 92 mm mounting points
  • Three-pin connector enables RPM monitoring via motherboard header
  • Built-in temperature sensor adjusts speed to thermal load

Zyvpee 92×38 mm 12 V Ball-Bearing Fan

The Zyvpee 3612KL-04W-B66 is a 92 mm by 38 mm case fan that runs on 12 V DC at 0.68 A. It uses a three-pin power connector and a ball bearing for continuous server or workstation cooling. The black frame has no integrated lighting.

Suits builds needing a 38 mm thick 92 mm fan

This fan fits chassis or server trays that accept a 92×38 mm footprint and a standard three-wire connection. It is not for systems that require PWM speed control or LED illumination. Builders needing a thinner frame or a four-pin connector should look elsewhere.

38 mm thickness decides fit in tight server bays

The 38 mm depth is the critical dimension; verify that your mounting holes and clearance match this profile before ordering. The three-pin header provides voltage-based speed regulation without PWM signalling.

Puncte forte

  • Ball bearing motor reduces friction for longer service life
  • 12 V 0.68 A power draw keeps energy use low
  • 92 x 38 mm frame fits standard 92 mm mounting points
  • Three-pin connector enables RPM monitoring via motherboard header
  • Built-in temperature sensor adjusts speed to thermal load

Specificații

BrandZyvpee
Series3612KL-04W-B66 4W022
Model3612KL-04W-B66
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesServer Cooling
Dimensions92*38MM

Întrebări despre acest articol

How do I install the Zyvpee 3612KL-04W-B66 92x38mm fan and which step is often missed?

Mount the 92 mm frame using four screws at the 38 mm depth, connect the 3-pin header to a 12 V motherboard socket, and ensure the third wire feeds the temperature sensor signal back to the board for speed control.

What maintenance or replacement will the Zyvpee 3612KL-04W-B66 92x38mm fan need later?

The ball bearing is sealed for life; periodically remove dust from the blades with compressed air and replace the unit only if bearing noise appears or airflow falls below server cooling requirements.

What limit appears first on the Zyvpee 3612KL-04W-B66 92x38mm fan under sustained server loads?

Continuous 12 V 0.68 A operation at full speed generates the most heat in the ball bearing, so bearing temperature rise is the first limiting factor during extended duty cycles.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.