我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black 92x38mm case fan with three-pin connector and ball bearing

Zyvpee

Zyvpee 3612KL-04W-B66 92x38mm 12V 0.68A 3 Pin Ball Bearing Case Fan

SKU CH-JJKN-4EX0H

A 92 x 38 mm ball-bearing case fan running at 12 V and 0.68 A with a three-pin connector and temperature sensor for server cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesServer Cooling
  • Ball bearing motor reduces friction for longer service life
  • 12 V 0.68 A power draw keeps energy use low
  • 92 x 38 mm frame fits standard 92 mm mounting points
  • Three-pin connector enables RPM monitoring via motherboard header
  • Built-in temperature sensor adjusts speed to thermal load

Zyvpee 92×38 mm 12 V Ball-Bearing Fan

The Zyvpee 3612KL-04W-B66 is a 92 mm by 38 mm case fan that runs on 12 V DC at 0.68 A. It uses a three-pin power connector and a ball bearing for continuous server or workstation cooling. The black frame has no integrated lighting.

Suits builds needing a 38 mm thick 92 mm fan

This fan fits chassis or server trays that accept a 92×38 mm footprint and a standard three-wire connection. It is not for systems that require PWM speed control or LED illumination. Builders needing a thinner frame or a four-pin connector should look elsewhere.

38 mm thickness decides fit in tight server bays

The 38 mm depth is the critical dimension; verify that your mounting holes and clearance match this profile before ordering. The three-pin header provides voltage-based speed regulation without PWM signalling.

商品特色

  • Ball bearing motor reduces friction for longer service life
  • 12 V 0.68 A power draw keeps energy use low
  • 92 x 38 mm frame fits standard 92 mm mounting points
  • Three-pin connector enables RPM monitoring via motherboard header
  • Built-in temperature sensor adjusts speed to thermal load

商品規格

BrandZyvpee
Series3612KL-04W-B66 4W022
Model3612KL-04W-B66
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesServer Cooling
Dimensions92*38MM

商品問答

How do I install the Zyvpee 3612KL-04W-B66 92x38mm fan and which step is often missed?

Mount the 92 mm frame using four screws at the 38 mm depth, connect the 3-pin header to a 12 V motherboard socket, and ensure the third wire feeds the temperature sensor signal back to the board for speed control.

What maintenance or replacement will the Zyvpee 3612KL-04W-B66 92x38mm fan need later?

The ball bearing is sealed for life; periodically remove dust from the blades with compressed air and replace the unit only if bearing noise appears or airflow falls below server cooling requirements.

What limit appears first on the Zyvpee 3612KL-04W-B66 92x38mm fan under sustained server loads?

Continuous 12 V 0.68 A operation at full speed generates the most heat in the ball bearing, so bearing temperature rise is the first limiting factor during extended duty cycles.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。