نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 92x38mm case fan with three-pin connector and ball bearing

Zyvpee

Zyvpee 3612KL-04W-B66 92x38mm 12V 0.68A 3 Pin Ball Bearing Case Fan

SKU CH-JJKN-4EX0H

A 92 x 38 mm ball-bearing case fan running at 12 V and 0.68 A with a three-pin connector and temperature sensor for server cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesServer Cooling
  • Ball bearing motor reduces friction for longer service life
  • 12 V 0.68 A power draw keeps energy use low
  • 92 x 38 mm frame fits standard 92 mm mounting points
  • Three-pin connector enables RPM monitoring via motherboard header
  • Built-in temperature sensor adjusts speed to thermal load

Zyvpee 92×38 mm 12 V Ball-Bearing Fan

The Zyvpee 3612KL-04W-B66 is a 92 mm by 38 mm case fan that runs on 12 V DC at 0.68 A. It uses a three-pin power connector and a ball bearing for continuous server or workstation cooling. The black frame has no integrated lighting.

Suits builds needing a 38 mm thick 92 mm fan

This fan fits chassis or server trays that accept a 92×38 mm footprint and a standard three-wire connection. It is not for systems that require PWM speed control or LED illumination. Builders needing a thinner frame or a four-pin connector should look elsewhere.

38 mm thickness decides fit in tight server bays

The 38 mm depth is the critical dimension; verify that your mounting holes and clearance match this profile before ordering. The three-pin header provides voltage-based speed regulation without PWM signalling.

أبرز المميزات

  • Ball bearing motor reduces friction for longer service life
  • 12 V 0.68 A power draw keeps energy use low
  • 92 x 38 mm frame fits standard 92 mm mounting points
  • Three-pin connector enables RPM monitoring via motherboard header
  • Built-in temperature sensor adjusts speed to thermal load

المواصفات

BrandZyvpee
Series3612KL-04W-B66 4W022
Model3612KL-04W-B66
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesServer Cooling
Dimensions92*38MM

أسئلة حول هذا المنتج

How do I install the Zyvpee 3612KL-04W-B66 92x38mm fan and which step is often missed?

Mount the 92 mm frame using four screws at the 38 mm depth, connect the 3-pin header to a 12 V motherboard socket, and ensure the third wire feeds the temperature sensor signal back to the board for speed control.

What maintenance or replacement will the Zyvpee 3612KL-04W-B66 92x38mm fan need later?

The ball bearing is sealed for life; periodically remove dust from the blades with compressed air and replace the unit only if bearing noise appears or airflow falls below server cooling requirements.

What limit appears first on the Zyvpee 3612KL-04W-B66 92x38mm fan under sustained server loads?

Continuous 12 V 0.68 A operation at full speed generates the most heat in the ball bearing, so bearing temperature rise is the first limiting factor during extended duty cycles.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.