Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 97mm centrifugal blower fan, 33mm thick, 3-pin connector

Zyvpee

Zyvpee BFB1012H-F00 97mm 33mm 12V 1.2A 3-pin blower case fan

SKU CH-6YC8-P58AT

97 mm centrifugal blower with dual-ball bearing, 12 V 1.2 A draw and 3-pin connector

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Dimensions97*33
  • 97 mm frame fits tight chassis spaces
  • 33 mm thick blower directs airflow through narrow channels
  • 2 ball bearing design resists wear in continuous operation
  • 12 V 1.2 A rating delivers strong static pressure
  • 3 pin connector enables motherboard speed monitoring

Compact centrifugal blower for tight chassis

This 97 mm by 33 mm blower moves air across a narrow path using a centrifugal wheel. It runs on 12 V and draws 1.2 A through a standard three-pin connector. The two-ball bearing is built for continuous operation in industrial or custom small-form-factor builds.

Two-ball bearing and fixed three-pin lead

The bearing choice reduces friction noise over sleeve alternatives and tolerates higher ambient temperatures. The three-wire pinout supplies power, ground and a tachometer signal so the motherboard can monitor speed. No PWM wire is present, so voltage control is the only speed-regulation method.

Direct screw mount with 97 mm hole spacing

Four corner holes match the 9733 mounting pattern for drop-in replacement of Delta 9733 units. The 33 mm depth fits many 1 U racks and GPU shrouds, but verify clearance against nearby capacitors or heatsinks. Incorrect polarity on the three-pin header will prevent spin-up, so align the key before powering on.

Puncte forte

  • 97 mm frame fits tight chassis spaces
  • 33 mm thick blower directs airflow through narrow channels
  • 2 ball bearing design resists wear in continuous operation
  • 12 V 1.2 A rating delivers strong static pressure
  • 3 pin connector enables motherboard speed monitoring

Specificații

Brand3ccooler.com
SeriesBFB1012H -F00
ModelBFB1012H
TypeCase Fan
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions97*33

Întrebări despre acest articol

How often will the 2 Ball bearing need lubrication or replacement?

The dual-ball bearing is sealed for life and rated for continuous operation, so no scheduled lubrication or bearing swap is required.

What limit appears first when the blower runs at 12 V 1.2 A for hours?

The 1.2 A current draw at 12 V sets the thermal ceiling; the motor hits its steady-state temperature before airflow or noise become limiting factors.

How loud and hot does the 97 mm × 33 mm centrifugal blower get under all-day load?

At 12 V the fan draws 1.2 A and moves 37 L/s; expect a moderate whir and warm exhaust, but no extreme noise or surface heat in normal chassis airflow.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.