Zyvpee
Zyvpee BFB1012H-F00 97mm 33mm 12V 1.2A 3-pin blower case fan
97 mm centrifugal blower with dual-ball bearing, 12 V 1.2 A draw and 3-pin connector
- TypeCase Fan
- Bearing Type2 Ball
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Dimensions97*33
- 97 mm frame fits tight chassis spaces
- 33 mm thick blower directs airflow through narrow channels
- 2 ball bearing design resists wear in continuous operation
- 12 V 1.2 A rating delivers strong static pressure
- 3 pin connector enables motherboard speed monitoring
Compact centrifugal blower for tight chassis
This 97 mm by 33 mm blower moves air across a narrow path using a centrifugal wheel. It runs on 12 V and draws 1.2 A through a standard three-pin connector. The two-ball bearing is built for continuous operation in industrial or custom small-form-factor builds.
Two-ball bearing and fixed three-pin lead
The bearing choice reduces friction noise over sleeve alternatives and tolerates higher ambient temperatures. The three-wire pinout supplies power, ground and a tachometer signal so the motherboard can monitor speed. No PWM wire is present, so voltage control is the only speed-regulation method.
Direct screw mount with 97 mm hole spacing
Four corner holes match the 9733 mounting pattern for drop-in replacement of Delta 9733 units. The 33 mm depth fits many 1 U racks and GPU shrouds, but verify clearance against nearby capacitors or heatsinks. Incorrect polarity on the three-pin header will prevent spin-up, so align the key before powering on.
Besonderheiten
- 97 mm frame fits tight chassis spaces
- 33 mm thick blower directs airflow through narrow channels
- 2 ball bearing design resists wear in continuous operation
- 12 V 1.2 A rating delivers strong static pressure
- 3 pin connector enables motherboard speed monitoring
Technische Daten
| Brand | 3ccooler.com |
|---|---|
| Series | BFB1012H -F00 |
| Model | BFB1012H |
| Type | Case Fan |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Dimensions | 97*33 |
Fragen zu diesem Artikel
How often will the 2 Ball bearing need lubrication or replacement?
The dual-ball bearing is sealed for life and rated for continuous operation, so no scheduled lubrication or bearing swap is required.
What limit appears first when the blower runs at 12 V 1.2 A for hours?
The 1.2 A current draw at 12 V sets the thermal ceiling; the motor hits its steady-state temperature before airflow or noise become limiting factors.
How loud and hot does the 97 mm × 33 mm centrifugal blower get under all-day load?
At 12 V the fan draws 1.2 A and moves 37 L/s; expect a moderate whir and warm exhaust, but no extreme noise or surface heat in normal chassis airflow.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.0000106BTC
Auf Lager