Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 97mm centrifugal blower fan, 33mm thick, 3-pin connector

Zyvpee

Zyvpee BFB1012H-F00 97mm 33mm 12V 1.2A 3-pin blower case fan

SKU CH-6YC8-P58AT

97 mm centrifugal blower with dual-ball bearing, 12 V 1.2 A draw and 3-pin connector

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Dimensions97*33
  • 97 mm frame fits tight chassis spaces
  • 33 mm thick blower directs airflow through narrow channels
  • 2 ball bearing design resists wear in continuous operation
  • 12 V 1.2 A rating delivers strong static pressure
  • 3 pin connector enables motherboard speed monitoring

Compact centrifugal blower for tight chassis

This 97 mm by 33 mm blower moves air across a narrow path using a centrifugal wheel. It runs on 12 V and draws 1.2 A through a standard three-pin connector. The two-ball bearing is built for continuous operation in industrial or custom small-form-factor builds.

Two-ball bearing and fixed three-pin lead

The bearing choice reduces friction noise over sleeve alternatives and tolerates higher ambient temperatures. The three-wire pinout supplies power, ground and a tachometer signal so the motherboard can monitor speed. No PWM wire is present, so voltage control is the only speed-regulation method.

Direct screw mount with 97 mm hole spacing

Four corner holes match the 9733 mounting pattern for drop-in replacement of Delta 9733 units. The 33 mm depth fits many 1 U racks and GPU shrouds, but verify clearance against nearby capacitors or heatsinks. Incorrect polarity on the three-pin header will prevent spin-up, so align the key before powering on.

Punti di forza

  • 97 mm frame fits tight chassis spaces
  • 33 mm thick blower directs airflow through narrow channels
  • 2 ball bearing design resists wear in continuous operation
  • 12 V 1.2 A rating delivers strong static pressure
  • 3 pin connector enables motherboard speed monitoring

Caratteristiche tecniche

Brand3ccooler.com
SeriesBFB1012H -F00
ModelBFB1012H
TypeCase Fan
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions97*33

Domande su questo articolo

How often will the 2 Ball bearing need lubrication or replacement?

The dual-ball bearing is sealed for life and rated for continuous operation, so no scheduled lubrication or bearing swap is required.

What limit appears first when the blower runs at 12 V 1.2 A for hours?

The 1.2 A current draw at 12 V sets the thermal ceiling; the motor hits its steady-state temperature before airflow or noise become limiting factors.

How loud and hot does the 97 mm × 33 mm centrifugal blower get under all-day load?

At 12 V the fan draws 1.2 A and moves 37 L/s; expect a moderate whir and warm exhaust, but no extreme noise or surface heat in normal chassis airflow.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.