Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 80 by 80 by 20 mm square case fan with ball bearing

Zyvpee

Zyvpee EE80201S1-0000-G99 8020 12V 1.56W 80mm case fan

SKU CH-SW2H-5JRXK

80 mm ball-bearing case fan delivering 12 V, 1.56 W cooling for Dell 99GRF servers

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power ConnectorSee pics
  • ColorBlack
  • LEDNon-LED
  • Ball-bearing reliability for long service life
  • 12 V, 1.56 W power draw keeps energy use low
  • 80 x 20 mm form factor fits standard 80 mm mounts
  • Three-wire, five-pin connector supports speed monitoring
  • Direct replacement for Dell 99GRF server fan

80 mm server replacement fan

The Zyvpee EE80201S1-0000-G99 is an 80 mm square DC case fan rated at 12 V and 1.56 W. It uses a ball bearing and a three-wire lead ending in a five-pin housing. The unit matches the Dell part number 99GRF and is intended as a direct drop-in cooler for compatible server chassis.

Three-wire five-pin connector detail

The fan ships with a three-wire cable that terminates in a five-pin connector as shown in the product photos. This wiring arrangement carries power, ground and a tachometer signal on specific pins that must match the motherboard or fan header layout. No additional cables, adapters or mounting screws are included in the package.

Verify header pin-out and clearance

Before ordering, confirm that your system’s fan header uses the same five-pin pin-out and that the 80 mm by 20 mm frame fits the mounting holes. The photographs are the definitive reference for connector orientation and physical dimensions; if they do not match your requirements, the fan will not install correctly.

Puncte forte

  • Ball-bearing reliability for long service life
  • 12 V, 1.56 W power draw keeps energy use low
  • 80 x 20 mm form factor fits standard 80 mm mounts
  • Three-wire, five-pin connector supports speed monitoring
  • Direct replacement for Dell 99GRF server fan

Specificații

SeriesEE80201S1-0000-G99
ModelEE80201S1-0000-G99
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power ConnectorSee pics
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*20mm

Întrebări despre acest articol

Does the ball bearing in the EE80201S1-0000-G99 need lubrication or replacement after long use?

The ball bearing is sealed and rated for continuous operation; no user lubrication is required and the fan is replaced as a unit if it ever fails.

What limit appears first when the 12 V 1.56 W fan runs at full speed for hours?

The 1.56 W power draw sets the thermal ceiling; the motor reaches its steady-state temperature before any voltage or current limit is hit.

How loud does the 80 mm Sunon cooler get when it runs all day in a server chassis?

With a ball bearing and 12 V DC drive the acoustic signature stays a steady low hum; no rattle or bearing whine develops over time.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.