Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black 80 by 80 by 20 mm square case fan with ball bearing

Zyvpee

Zyvpee EE80201S1-0000-G99 8020 12V 1.56W 80mm case fan

SKU CH-SW2H-5JRXK

80 mm ball-bearing case fan delivering 12 V, 1.56 W cooling for Dell 99GRF servers

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power ConnectorSee pics
  • ColorBlack
  • LEDNon-LED
  • Ball-bearing reliability for long service life
  • 12 V, 1.56 W power draw keeps energy use low
  • 80 x 20 mm form factor fits standard 80 mm mounts
  • Three-wire, five-pin connector supports speed monitoring
  • Direct replacement for Dell 99GRF server fan

80 mm server replacement fan

The Zyvpee EE80201S1-0000-G99 is an 80 mm square DC case fan rated at 12 V and 1.56 W. It uses a ball bearing and a three-wire lead ending in a five-pin housing. The unit matches the Dell part number 99GRF and is intended as a direct drop-in cooler for compatible server chassis.

Three-wire five-pin connector detail

The fan ships with a three-wire cable that terminates in a five-pin connector as shown in the product photos. This wiring arrangement carries power, ground and a tachometer signal on specific pins that must match the motherboard or fan header layout. No additional cables, adapters or mounting screws are included in the package.

Verify header pin-out and clearance

Before ordering, confirm that your system’s fan header uses the same five-pin pin-out and that the 80 mm by 20 mm frame fits the mounting holes. The photographs are the definitive reference for connector orientation and physical dimensions; if they do not match your requirements, the fan will not install correctly.

Najważniejsze cechy

  • Ball-bearing reliability for long service life
  • 12 V, 1.56 W power draw keeps energy use low
  • 80 x 20 mm form factor fits standard 80 mm mounts
  • Three-wire, five-pin connector supports speed monitoring
  • Direct replacement for Dell 99GRF server fan

Specyfikacja

SeriesEE80201S1-0000-G99
ModelEE80201S1-0000-G99
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power ConnectorSee pics
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*20mm

Pytania dotyczące tego produktu

Does the ball bearing in the EE80201S1-0000-G99 need lubrication or replacement after long use?

The ball bearing is sealed and rated for continuous operation; no user lubrication is required and the fan is replaced as a unit if it ever fails.

What limit appears first when the 12 V 1.56 W fan runs at full speed for hours?

The 1.56 W power draw sets the thermal ceiling; the motor reaches its steady-state temperature before any voltage or current limit is hit.

How loud does the 80 mm Sunon cooler get when it runs all day in a server chassis?

With a ball bearing and 12 V DC drive the acoustic signature stays a steady low hum; no rattle or bearing whine develops over time.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.