Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 97x33mm centrifugal blower fan with three-wire connector

Zyvpee

Zyvpee F9733B12HP 97x33mm 12V 1.1A 3-wire blower case fan

SKU CH-CBV7-D11TZ

97×33 mm centrifugal blower fan runs on 12 V at 1.1 A with a three-wire ball-bearing motor for HP server cooling

  • TypeCase Fan
  • Fan Size100mm
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • Centrifugal blower design moves air through tight server channels
  • 12 V, 1.1 A draw fits standard DC power rails
  • 97 × 33 mm frame matches HP 336580-001 and 360327-001 bays
  • Ball bearing construction extends operating life under continuous load
  • Three-wire connector enables RPM monitoring for fan-control systems

97x33mm Blower Fan for Server Use

This Zyvpee F9733B12HP is a 12V centrifugal blower measuring 97 by 33 millimetres. It draws 1.1 amps through a three-wire power connector. The unit uses a ball bearing and has no LED lighting.

Suits Direct Replacement in Compatible HP Systems

It matches HP part numbers 336580-001 and 360327-001 for targeted cooling. Builders needing standard axial airflow or PWM speed control should look elsewhere. The fixed three-wire interface limits speed regulation options.

Handles Focused Airflow in Confined Chassis

The 100mm class blower wheel moves air perpendicular to the intake for directed component cooling. It runs out of headroom when case ventilation relies on high-volume axial flow or when a four-pin header is required.

Puncte forte

  • Centrifugal blower design moves air through tight server channels
  • 12 V, 1.1 A draw fits standard DC power rails
  • 97 × 33 mm frame matches HP 336580-001 and 360327-001 bays
  • Ball bearing construction extends operating life under continuous load
  • Three-wire connector enables RPM monitoring for fan-control systems

Specificații

Brand3ccooler.com
SeriesF9733B12HP
ModelF9733B12HP
TypeCase Fan
Fan Size100mm
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesBlower
Dimensions97*33mm

Întrebări despre acest articol

Will this 97 x 33 mm blower fit the HP 336580-001 slot in my server?

The fan matches the HP 336580-001 and 360327-001 part numbers, so it is a direct replacement for that slot.

Can I run this 12 V 1.1 A blower on an older motherboard header rated for lower current?

The fan draws 1.1 A at 12 V; verify your header can supply at least that much current before connecting.

How do I confirm the ball-bearing blower is spinning correctly after installation?

Check that the tachometer wire reports a stable RPM in BIOS or monitoring software once the system powers on.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.