Zyvpee
Zyvpee F9733B12HP 97x33mm 12V 1.1A 3-wire blower case fan
97×33 mm centrifugal blower fan runs on 12 V at 1.1 A with a three-wire ball-bearing motor for HP server cooling
- TypeCase Fan
- Fan Size100mm
- Bearing TypeBall
- Power Connector3 Wires
- ColorBlack
- LEDNon-LED
- Centrifugal blower design moves air through tight server channels
- 12 V, 1.1 A draw fits standard DC power rails
- 97 × 33 mm frame matches HP 336580-001 and 360327-001 bays
- Ball bearing construction extends operating life under continuous load
- Three-wire connector enables RPM monitoring for fan-control systems
97x33mm Blower Fan for Server Use
This Zyvpee F9733B12HP is a 12V centrifugal blower measuring 97 by 33 millimetres. It draws 1.1 amps through a three-wire power connector. The unit uses a ball bearing and has no LED lighting.
Suits Direct Replacement in Compatible HP Systems
It matches HP part numbers 336580-001 and 360327-001 for targeted cooling. Builders needing standard axial airflow or PWM speed control should look elsewhere. The fixed three-wire interface limits speed regulation options.
Handles Focused Airflow in Confined Chassis
The 100mm class blower wheel moves air perpendicular to the intake for directed component cooling. It runs out of headroom when case ventilation relies on high-volume axial flow or when a four-pin header is required.
주요 특징
- Centrifugal blower design moves air through tight server channels
- 12 V, 1.1 A draw fits standard DC power rails
- 97 × 33 mm frame matches HP 336580-001 and 360327-001 bays
- Ball bearing construction extends operating life under continuous load
- Three-wire connector enables RPM monitoring for fan-control systems
사양
| Brand | 3ccooler.com |
|---|---|
| Series | F9733B12HP |
| Model | F9733B12HP |
| Type | Case Fan |
| Fan Size | 100mm |
| Bearing Type | Ball |
| Power Connector | 3 Wires |
| Color | Black |
| LED | Non-LED |
| Features | Blower |
| Dimensions | 97*33mm |
이 상품에 대한 질문
Will this 97 x 33 mm blower fit the HP 336580-001 slot in my server?
The fan matches the HP 336580-001 and 360327-001 part numbers, so it is a direct replacement for that slot.
Can I run this 12 V 1.1 A blower on an older motherboard header rated for lower current?
The fan draws 1.1 A at 12 V; verify your header can supply at least that much current before connecting.
How do I confirm the ball-bearing blower is spinning correctly after installation?
Check that the tachometer wire reports a stable RPM in BIOS or monitoring software once the system powers on.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001056BTC
재고 있음