暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Zyvpee

Zyvpee F9733B12HP 97x33mm 12V 1.1A 3-wire blower case fan

SKU CH-CBV7-D11TZ

97×33 mm centrifugal blower fan runs on 12 V at 1.1 A with a three-wire ball-bearing motor for HP server cooling

  • TypeCase Fan
  • Fan Size100mm
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • Centrifugal blower design moves air through tight server channels
  • 12 V, 1.1 A draw fits standard DC power rails
  • 97 × 33 mm frame matches HP 336580-001 and 360327-001 bays
  • Ball bearing construction extends operating life under continuous load
  • Three-wire connector enables RPM monitoring for fan-control systems

97x33mm Blower Fan for Server Use

This Zyvpee F9733B12HP is a 12V centrifugal blower measuring 97 by 33 millimetres. It draws 1.1 amps through a three-wire power connector. The unit uses a ball bearing and has no LED lighting.

Suits Direct Replacement in Compatible HP Systems

It matches HP part numbers 336580-001 and 360327-001 for targeted cooling. Builders needing standard axial airflow or PWM speed control should look elsewhere. The fixed three-wire interface limits speed regulation options.

Handles Focused Airflow in Confined Chassis

The 100mm class blower wheel moves air perpendicular to the intake for directed component cooling. It runs out of headroom when case ventilation relies on high-volume axial flow or when a four-pin header is required.

特長

  • Centrifugal blower design moves air through tight server channels
  • 12 V, 1.1 A draw fits standard DC power rails
  • 97 × 33 mm frame matches HP 336580-001 and 360327-001 bays
  • Ball bearing construction extends operating life under continuous load
  • Three-wire connector enables RPM monitoring for fan-control systems

仕様

Brand3ccooler.com
SeriesF9733B12HP
ModelF9733B12HP
TypeCase Fan
Fan Size100mm
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesBlower
Dimensions97*33mm

この商品に関する質問

Will this 97 x 33 mm blower fit the HP 336580-001 slot in my server?

The fan matches the HP 336580-001 and 360327-001 part numbers, so it is a direct replacement for that slot.

Can I run this 12 V 1.1 A blower on an older motherboard header rated for lower current?

The fan draws 1.1 A at 12 V; verify your header can supply at least that much current before connecting.

How do I confirm the ball-bearing blower is spinning correctly after installation?

Check that the tachometer wire reports a stable RPM in BIOS or monitoring software once the system powers on.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。