BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277711BTC
Skladom
A-Tech
A-Tech 16GB DDR3L 1333 ECC RDIMM 2Rx4 1.35V Nanya NT16GC72C4NB0NL-CG Server Memory
16 GB DDR3L 1333 ECC registered DIMM with 2Rx4 organisation and 1.35 V low-voltage operation
- Capacity16GB
- SpeedDDR3L 1333 (PC3L 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- 16 GB DDR3L 1333 MHz registered ECC module boosts server capacity
- 35 V low-voltage operation cuts power draw in 24/7 systems
- CL9 latency delivers responsive data access for heavy workloads
- 2Rx4 dual-rank organisation maximises density per DIMM slot
- Rigorously tested major-brand chips ensure dependable uptime
Capacity and role
This is a 16GB DDR3L 1333 ECC registered DIMM built for server and workstation platforms that require error correction. The module runs at 1.35V with CL9 latency and uses a 2Rx4 organisation for stable multi-threaded workloads.
Suited and not suited
It suits administrators upgrading compatible DDR3L systems that specifically accept registered ECC memory. It will not work in desktop boards that only support unbuffered non-ECC modules or in platforms limited to standard 1.5V DDR3.
Installation notes
The 240-pin DIMM seats in a standard DDR3 slot but the registered buffer and ECC function require motherboard and BIOS support; mixing registered with unbuffered DIMMs will prevent boot. Verify the qualified vendor list for your server before fitting.
Prednosti
- 16 GB DDR3L 1333 MHz registered ECC module boosts server capacity
- 35 V low-voltage operation cuts power draw in 24/7 systems
- CL9 latency delivers responsive data access for heavy workloads
- 2Rx4 dual-rank organisation maximises density per DIMM slot
- Rigorously tested major-brand chips ensure dependable uptime
Špecifikácie
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Nanya |
| Model | NT16GC72C4NB0NL-CG |
| Capacity | 16GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | NT16GC72C4NB0NL-CG |
Otázky k tomuto produktu
My server only has standard DDR3 slots — will this 1.35 V DDR3L 1333 module run in them?
Yes — DDR3L is backward-compatible with 1.5 V DDR3 slots; the module will operate at the standard 1.5 V when installed in a non-low-voltage system.
I plan to keep my existing 8 GB DDR3 1333 ECC RDIMMs — can I mix them with this 16 GB 2Rx4 stick?
Mixing ranks and capacities is often possible, but the memory controller must support the combined population; check the platform’s qualified-vendor list for approved 8 GB + 16 GB RDIMM configurations.
After installation, how do I confirm the module is running at 1333 MHz with ECC active?
Enter the BIOS or use a tool such as dmidecode / CPU-Z; verify the reported speed shows 1333 MT/s, the type reads DDR3L, and ECC status is shown as enabled or multi-bit.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
