نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

A-Tech

A-Tech 16GB DDR3L 1333 ECC RDIMM 2Rx4 1.35V Nanya NT16GC72C4NB0NL-CG Server Memory

SKU CH-Y4JN-05NST

16 GB DDR3L 1333 ECC registered DIMM with 2Rx4 organisation and 1.35 V low-voltage operation

  • Capacity16GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR3L 1333 MHz registered ECC module boosts server capacity
  • 35 V low-voltage operation cuts power draw in 24/7 systems
  • CL9 latency delivers responsive data access for heavy workloads
  • 2Rx4 dual-rank organisation maximises density per DIMM slot
  • Rigorously tested major-brand chips ensure dependable uptime

Capacity and role

This is a 16GB DDR3L 1333 ECC registered DIMM built for server and workstation platforms that require error correction. The module runs at 1.35V with CL9 latency and uses a 2Rx4 organisation for stable multi-threaded workloads.

Suited and not suited

It suits administrators upgrading compatible DDR3L systems that specifically accept registered ECC memory. It will not work in desktop boards that only support unbuffered non-ECC modules or in platforms limited to standard 1.5V DDR3.

Installation notes

The 240-pin DIMM seats in a standard DDR3 slot but the registered buffer and ECC function require motherboard and BIOS support; mixing registered with unbuffered DIMMs will prevent boot. Verify the qualified vendor list for your server before fitting.

أبرز المميزات

  • 16 GB DDR3L 1333 MHz registered ECC module boosts server capacity
  • 35 V low-voltage operation cuts power draw in 24/7 systems
  • CL9 latency delivers responsive data access for heavy workloads
  • 2Rx4 dual-rank organisation maximises density per DIMM slot
  • Rigorously tested major-brand chips ensure dependable uptime

المواصفات

BrandA-Tech
SeriesCompatible Replacement for Nanya
ModelNT16GC72C4NB0NL-CG
Capacity16GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesNT16GC72C4NB0NL-CG

أسئلة حول هذا المنتج

My server only has standard DDR3 slots — will this 1.35 V DDR3L 1333 module run in them?

Yes — DDR3L is backward-compatible with 1.5 V DDR3 slots; the module will operate at the standard 1.5 V when installed in a non-low-voltage system.

I plan to keep my existing 8 GB DDR3 1333 ECC RDIMMs — can I mix them with this 16 GB 2Rx4 stick?

Mixing ranks and capacities is often possible, but the memory controller must support the combined population; check the platform’s qualified-vendor list for approved 8 GB + 16 GB RDIMM configurations.

After installation, how do I confirm the module is running at 1333 MHz with ECC active?

Enter the BIOS or use a tool such as dmidecode / CPU-Z; verify the reported speed shows 1333 MT/s, the type reads DDR3L, and ECC status is shown as enabled or multi-bit.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.