Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR3 ECC UDIMM modules 240 pin 1.5V

A-Tech

A-Tech 8GB (2x4GB) DDR3 1333 ECC UDIMM 2Rx8 1.5V Server RAM

SKU CH-R1WF-RMG99

Dual-channel 8 GB DDR3 ECC UDIMM kit running at 1333 MHz with CL9 latency for servers and workstations

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

Speed DDR3 1333 (PC3 10600)

  • ECC protection prevents data corruption in critical workloads
  • 2Rx8 dual-rank design increases memory density per module
  • 1333 MHz DDR3 speed matches server platform specifications
  • 5 V standard voltage ensures broad DDR3 compatibility
  • 240-pin UDIMM form factor fits ECC unbuffered server slots

DDR3 ECC UDIMM Kit

This 8GB kit contains two 4GB unbuffered DIMMs built for DDR3 servers and workstations that require error-correcting memory. Each module runs at 1333 MHz with CL9 latency and standard 1.5V operation. The dual-rank x8 organisation suits platforms designed for registered-style density in an unbuffered form factor.

PC3-10600 Interface Limits

The DDR3 1333 standard tops out at 10600 MB/s theoretical bandwidth, so throughput cannot exceed that ceiling regardless of CPU capability. Unbuffered ECC modules also impose a maximum of two DIMMs per memory channel on most server chipsets, limiting total slots to four in a dual-channel board. Systems needing higher frequencies or registered buffering must use a different memory generation.

8GB Dual-Channel Capacity

Two 4GB sticks provide 8GB in dual-channel mode, enough for light virtualisation, file serving or legacy database workloads that fit in that footprint. Workloads demanding larger datasets, heavy VM consolidation or in-memory analytics will exhaust the 8GB pool quickly, forcing swapping or requiring a platform that accepts higher-density modules.

Prednosti

  • ECC protection prevents data corruption in critical workloads
  • 2Rx8 dual-rank design increases memory density per module
  • 1333 MHz DDR3 speed matches server platform specifications
  • 5 V standard voltage ensures broad DDR3 compatibility
  • 240-pin UDIMM form factor fits ECC unbuffered server slots

Špecifikácie

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3-10600E
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Should I pick the 2x4 GB kit or a single 8 GB module for my dual-channel server board?

The 2 x 4 GB kit populates two channels at once, giving full dual-channel bandwidth with matched modules tested together.

What does the 1333 MHz rating actually deliver inside a DDR3 1333 server?

It runs at the rated 1333 MHz with CL9 timing, providing the standard PC3-10600 bandwidth your platform expects.

Is the 240-pin ECC UDIMM interface limited to certain chipsets or voltage rails?

The 240-pin DDR3 ECC UDIMM operates at 1.5 V and fits any server or workstation board that accepts unbuffered DDR3 ECC DIMMs.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.