Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR3 ECC UDIMM modules 240 pin 1.5V

A-Tech

A-Tech 8GB (2x4GB) DDR3 1333 ECC UDIMM 2Rx8 1.5V Server RAM

SKU CH-R1WF-RMG99

Dual-channel 8 GB DDR3 ECC UDIMM kit running at 1333 MHz with CL9 latency for servers and workstations

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

Speed DDR3 1333 (PC3 10600)

  • ECC protection prevents data corruption in critical workloads
  • 2Rx8 dual-rank design increases memory density per module
  • 1333 MHz DDR3 speed matches server platform specifications
  • 5 V standard voltage ensures broad DDR3 compatibility
  • 240-pin UDIMM form factor fits ECC unbuffered server slots

DDR3 ECC UDIMM Kit

This 8GB kit contains two 4GB unbuffered DIMMs built for DDR3 servers and workstations that require error-correcting memory. Each module runs at 1333 MHz with CL9 latency and standard 1.5V operation. The dual-rank x8 organisation suits platforms designed for registered-style density in an unbuffered form factor.

PC3-10600 Interface Limits

The DDR3 1333 standard tops out at 10600 MB/s theoretical bandwidth, so throughput cannot exceed that ceiling regardless of CPU capability. Unbuffered ECC modules also impose a maximum of two DIMMs per memory channel on most server chipsets, limiting total slots to four in a dual-channel board. Systems needing higher frequencies or registered buffering must use a different memory generation.

8GB Dual-Channel Capacity

Two 4GB sticks provide 8GB in dual-channel mode, enough for light virtualisation, file serving or legacy database workloads that fit in that footprint. Workloads demanding larger datasets, heavy VM consolidation or in-memory analytics will exhaust the 8GB pool quickly, forcing swapping or requiring a platform that accepts higher-density modules.

Pluspunten

  • ECC protection prevents data corruption in critical workloads
  • 2Rx8 dual-rank design increases memory density per module
  • 1333 MHz DDR3 speed matches server platform specifications
  • 5 V standard voltage ensures broad DDR3 compatibility
  • 240-pin UDIMM form factor fits ECC unbuffered server slots

Specificaties

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3-10600E
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Should I pick the 2x4 GB kit or a single 8 GB module for my dual-channel server board?

The 2 x 4 GB kit populates two channels at once, giving full dual-channel bandwidth with matched modules tested together.

What does the 1333 MHz rating actually deliver inside a DDR3 1333 server?

It runs at the rated 1333 MHz with CL9 timing, providing the standard PC3-10600 bandwidth your platform expects.

Is the 240-pin ECC UDIMM interface limited to certain chipsets or voltage rails?

The 240-pin DDR3 ECC UDIMM operates at 1.5 V and fits any server or workstation board that accepts unbuffered DDR3 ECC DIMMs.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.