Axiom
Axiom SSDEV10HA1T9-AX enterprise SSD 1.92 TB 2.5" SATA 600
Enterprise SSD with 1.92 TB capacity, 2.5" SATA 600 interface, 500 MB/s read and 490 MB/s write speeds for read-intensive workloads
- Read-intensive workloads handled reliably with 500 MB/s read speed
- Quick file updates and transfers backed by 490 MB/s write speed
- 256-bit encryption protects stored data from unauthorized access
- 92 TB capacity stores large datasets for enterprise needs
- SATA 600 interface optimizes burst performance for data center use
Enterprise SSD 1.92 TB SATA
The Axiom SSDEV10HA1T9-AX is a 2.5-inch enterprise solid-state drive with a 1.92 TB capacity. It connects via a SATA 600 interface and is built for read-intensive data-centre workloads. The drive includes 256-bit encryption and supports hot-swap installation.
Read-intensive workloads and hot-swap bays
This drive suits servers and storage arrays that prioritise consistent read throughput and 24/7 availability in hot-swap bays. It is less suitable for workloads dominated by sustained heavy writes or for systems that require a different interface protocol. Buyers needing higher write endurance should evaluate alternative drive classes.
SATA 600 interface with 500 MB/s read speed
The SATA 600 interface delivers a sequential read speed of 500 MB/s and a write speed of 490 MB/s. This single specification determines whether the drive matches the performance tier and connectivity of the target system. Verify that the host controller and backplane support SATA 600 before deployment.
Prednosti
- Read-intensive workloads handled reliably with 500 MB/s read speed
- Quick file updates and transfers backed by 490 MB/s write speed
- 256-bit encryption protects stored data from unauthorized access
- 92 TB capacity stores large datasets for enterprise needs
- SATA 600 interface optimizes burst performance for data center use
Špecifikácie
Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.
Otázky k tomuto produktu
How much power does the Axiom EV100 1.92 TB SSD draw during continuous 24/7 operation?
The drive is built for read-intensive workloads in enterprise data centers and uses a SATA 600 interface that optimizes burst performance while balancing capacity demands with 24/7 access expectations.
What host connector and bay size are required to install this 2.5" SATA 600 drive?
It fits a standard 2.5-inch internal bay and connects through a SATA 600 interface, so the system must provide a matching SATA data and power connector for hot-swap operation.
Will the 500 MB/s read and 490 MB/s write speeds saturate an older 3 Gbit/s SATA controller?
The SATA 600 interface runs at 6 Gbit/s and delivers up to 500 MB/s read and 490 MB/s write; on a 3 Gbit/s port the drive will operate at the controller's lower ceiling.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
