Axiom
Axiom SSDEV10HA1T9-AX enterprise SSD 1.92 TB 2.5" SATA 600
Enterprise SSD with 1.92 TB capacity, 2.5" SATA 600 interface, 500 MB/s read and 490 MB/s write speeds for read-intensive workloads
- Read-intensive workloads handled reliably with 500 MB/s read speed
- Quick file updates and transfers backed by 490 MB/s write speed
- 256-bit encryption protects stored data from unauthorized access
- 92 TB capacity stores large datasets for enterprise needs
- SATA 600 interface optimizes burst performance for data center use
Enterprise SSD 1.92 TB SATA
The Axiom SSDEV10HA1T9-AX is a 2.5-inch enterprise solid-state drive with a 1.92 TB capacity. It connects via a SATA 600 interface and is built for read-intensive data-centre workloads. The drive includes 256-bit encryption and supports hot-swap installation.
Read-intensive workloads and hot-swap bays
This drive suits servers and storage arrays that prioritise consistent read throughput and 24/7 availability in hot-swap bays. It is less suitable for workloads dominated by sustained heavy writes or for systems that require a different interface protocol. Buyers needing higher write endurance should evaluate alternative drive classes.
SATA 600 interface with 500 MB/s read speed
The SATA 600 interface delivers a sequential read speed of 500 MB/s and a write speed of 490 MB/s. This single specification determines whether the drive matches the performance tier and connectivity of the target system. Verify that the host controller and backplane support SATA 600 before deployment.
Pontos fortes
- Read-intensive workloads handled reliably with 500 MB/s read speed
- Quick file updates and transfers backed by 490 MB/s write speed
- 256-bit encryption protects stored data from unauthorized access
- 92 TB capacity stores large datasets for enterprise needs
- SATA 600 interface optimizes burst performance for data center use
Especificações
Ainda não há especificações publicadas para este artigo.
Perguntas sobre este artigo
How much power does the Axiom EV100 1.92 TB SSD draw during continuous 24/7 operation?
The drive is built for read-intensive workloads in enterprise data centers and uses a SATA 600 interface that optimizes burst performance while balancing capacity demands with 24/7 access expectations.
What host connector and bay size are required to install this 2.5" SATA 600 drive?
It fits a standard 2.5-inch internal bay and connects through a SATA 600 interface, so the system must provide a matching SATA data and power connector for hot-swap operation.
Will the 500 MB/s read and 490 MB/s write speeds saturate an older 3 Gbit/s SATA controller?
The SATA 600 interface runs at 6 Gbit/s and delivers up to 500 MB/s read and 490 MB/s write; on a 3 Gbit/s port the drive will operate at the controller's lower ceiling.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
