Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black cylindrical aluminum GPU support bracket, adjustable 55-75mm mini size with large base

BFKK

BFKK GPU Support Bracket Mini 55-75mm

SKU CH-PZY4-A3KFY

Mini adjustable bracket prevents graphics card sag with aluminium construction and 55-75 mm width plus 85-125 mm height range

  • ColorBlack
  • OptionMini

Option Mini

  • Prevents GPU sag with sturdy aluminum brace
  • Adjustable 85-125mm height fits varied cases
  • Mini 55-75mm width suits compact cards
  • Protects motherboard and PCIe slot from stress
  • Sleek black design enhances build aesthetics

Compact GPU Anti-Sag Bracket

The BFKK GPU Support Bracket Mini is a compact aluminium stand that prevents graphics-card sag in small-form-factor builds. Its black cylindrical design fits cases where a full-length brace will not clear the motherboard or power cables. Builders who need a low-profile prop for shorter cards will find it a tidy solution.

Adjustable 55-75 mm Support Range

The bracket extends from 55 mm to 75 mm in fine increments so it meets the backplate of most dual-slot cards without shimming. Height adjustment spans 85 mm to 125 mm from the base, covering mini-ITX chassis and mid-tower layouts alike. It cannot reach cards that sit higher than 125 mm from the motherboard tray.

Replaces Improvised Props and Fixed Brackets

Swapping a folded cardboard shim or a non-adjustable plastic stick for this aluminium brace adds rigidity and a cleaner look. The upgrade is worth it when the current prop slips under vibration or blocks cable routing. Builds with cards shorter than 55 mm or taller than 125 mm clearance need a different size.

Prednosti

  • Prevents GPU sag with sturdy aluminum brace
  • Adjustable 85-125mm height fits varied cases
  • Mini 55-75mm width suits compact cards
  • Protects motherboard and PCIe slot from stress
  • Sleek black design enhances build aesthetics

Špecifikácie

ColorBlack
OptionMini

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 55-75mm Mini bracket clear my existing CPU cooler and front-panel cables?

The Mini bracket occupies only a 55-75mm footprint, leaving room for most CPU coolers and front-panel routing; verify your case clearance before mounting.

How can I confirm the 85-125mm height adjustment is holding my card level after install?

Tighten the thumb-screw at the desired height between 85mm and 125mm, then sight along the card edge — it should sit parallel to the motherboard with no visible droop.

Does the package include mounting screws or only the aluminium stand?

The box contains the aluminium Mini bracket with integrated thumb-screw; case-specific motherboard standoffs or screws are not supplied and must be sourced separately.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.