Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Black cylindrical aluminum GPU support bracket, adjustable 55-75mm mini size with large base

BFKK

BFKK GPU Support Bracket Mini 55-75mm

SKU CH-PZY4-A3KFY

Mini adjustable bracket prevents graphics card sag with aluminium construction and 55-75 mm width plus 85-125 mm height range

  • ColorBlack
  • OptionMini

Option Mini

  • Prevents GPU sag with sturdy aluminum brace
  • Adjustable 85-125mm height fits varied cases
  • Mini 55-75mm width suits compact cards
  • Protects motherboard and PCIe slot from stress
  • Sleek black design enhances build aesthetics

Compact GPU Anti-Sag Bracket

The BFKK GPU Support Bracket Mini is a compact aluminium stand that prevents graphics-card sag in small-form-factor builds. Its black cylindrical design fits cases where a full-length brace will not clear the motherboard or power cables. Builders who need a low-profile prop for shorter cards will find it a tidy solution.

Adjustable 55-75 mm Support Range

The bracket extends from 55 mm to 75 mm in fine increments so it meets the backplate of most dual-slot cards without shimming. Height adjustment spans 85 mm to 125 mm from the base, covering mini-ITX chassis and mid-tower layouts alike. It cannot reach cards that sit higher than 125 mm from the motherboard tray.

Replaces Improvised Props and Fixed Brackets

Swapping a folded cardboard shim or a non-adjustable plastic stick for this aluminium brace adds rigidity and a cleaner look. The upgrade is worth it when the current prop slips under vibration or blocks cable routing. Builds with cards shorter than 55 mm or taller than 125 mm clearance need a different size.

Points forts

  • Prevents GPU sag with sturdy aluminum brace
  • Adjustable 85-125mm height fits varied cases
  • Mini 55-75mm width suits compact cards
  • Protects motherboard and PCIe slot from stress
  • Sleek black design enhances build aesthetics

Caractéristiques

ColorBlack
OptionMini

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Will the 55-75mm Mini bracket clear my existing CPU cooler and front-panel cables?

The Mini bracket occupies only a 55-75mm footprint, leaving room for most CPU coolers and front-panel routing; verify your case clearance before mounting.

How can I confirm the 85-125mm height adjustment is holding my card level after install?

Tighten the thumb-screw at the desired height between 85mm and 125mm, then sight along the card edge — it should sit parallel to the motherboard with no visible droop.

Does the package include mounting screws or only the aluminium stand?

The box contains the aluminium Mini bracket with integrated thumb-screw; case-specific motherboard standoffs or screws are not supplied and must be sourced separately.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.