BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278705BTC
Skladom
Brute Networks
Brute Networks 8GB DDR4-2400 ECC UDIMM 1Rx8 CL15 1.2V 869537-001-BN
8GB DDR4-2400 ECC unbuffered UDIMM with CL15 latency and 1.2V operation for HP-compatible servers
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 8GB DDR4-2400 capacity supports demanding server workloads
- ECC error correction protects data integrity in critical applications
- CL15 latency at 1.2V delivers responsive performance efficiently
- 1Rx8 unregistered design fits standard 288-pin DDR4 slots
- HP 869537-001 compatible module uses major-brand Samsung, SK Hynix or Micron chips
HP-Compatible Server Memory Upgrade
This module is an 8 GB DDR4-2400 ECC UDIMM built to match HP part 869537-001. It targets administrators extending the life of compatible HP servers and workstations that require unregistered error-correcting memory. The single-rank 1Rx8 organisation keeps electrical loading low on each channel. Major-brand DRAM from Samsung, SK Hynix or Micron is used throughout.
DDR4-2400 Interface Limits
The PC4-19200 rating sets a maximum transfer rate of 19200 MB/s at 2400 MT/s with a CAS latency of 15 cycles. Systems that only support lower DDR4 speeds will down-clock the module automatically. ECC functionality is only active on platforms that enable the feature in firmware. Mixing ranks or voltages on the same channel can prevent the server from posting.
Straightforward 288-Pin Installation
The 288-pin UDIMM fits standard DDR4 slots without tools and operates at 1.20 V. Alignment notches prevent backward insertion, so the module seats in one direction only. A common issue is populating slots in the wrong order for the specific server model; the platform manual should be consulted before adding memory. All modules in a matched order ship identically to avoid mismatch errors.
Prednosti
- 8GB DDR4-2400 capacity supports demanding server workloads
- ECC error correction protects data integrity in critical applications
- CL15 latency at 1.2V delivers responsive performance efficiently
- 1Rx8 unregistered design fits standard 288-pin DDR4 slots
- HP 869537-001 compatible module uses major-brand Samsung, SK Hynix or Micron chips
Špecifikácie
| Brand | HP |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
Otázky k tomuto produktu
Should I pick the single 8 GB DDR4-2400 module or add a second stick for dual-channel?
The module is sold as an 8 GB DDR4-2400 ECC UDIMM; adding a second identical stick enables dual-channel bandwidth on platforms that support it.
What does DDR4-2400 CL15 1.2 V mean for actual throughput and latency?
DDR4-2400 runs at 2400 MT/s with CAS latency 15 at 1.2 V, giving standard JEDEC timing for server workloads.
Is the 288-pin DDR4 interface limited by any chipset or CPU memory controller?
The 288-pin DDR4 UDIMM follows the JEDEC DDR4 standard; maximum speed is set by the platform memory controller.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
