BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Brute Networks
8GB DDR4-2400 ECC unbuffered UDIMM with CL15 latency and 1.2V operation for HP-compatible servers
This module is an 8 GB DDR4-2400 ECC UDIMM built to match HP part 869537-001. It targets administrators extending the life of compatible HP servers and workstations that require unregistered error-correcting memory. The single-rank 1Rx8 organisation keeps electrical loading low on each channel. Major-brand DRAM from Samsung, SK Hynix or Micron is used throughout.
The PC4-19200 rating sets a maximum transfer rate of 19200 MB/s at 2400 MT/s with a CAS latency of 15 cycles. Systems that only support lower DDR4 speeds will down-clock the module automatically. ECC functionality is only active on platforms that enable the feature in firmware. Mixing ranks or voltages on the same channel can prevent the server from posting.
The 288-pin UDIMM fits standard DDR4 slots without tools and operates at 1.20 V. Alignment notches prevent backward insertion, so the module seats in one direction only. A common issue is populating slots in the wrong order for the specific server model; the platform manual should be consulted before adding memory. All modules in a matched order ship identically to avoid mismatch errors.
| Brand | HP |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
The module is sold as an 8 GB DDR4-2400 ECC UDIMM; adding a second identical stick enables dual-channel bandwidth on platforms that support it.
DDR4-2400 runs at 2400 MT/s with CAS latency 15 at 1.2 V, giving standard JEDEC timing for server workloads.
The 288-pin DDR4 UDIMM follows the JEDEC DDR4 standard; maximum speed is set by the platform memory controller.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?