BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Corsair
64 GB quad-channel DDR5 kit with four 16 GB ECC registered modules running at 5600 MT/s CL40 and 1.25 V
This 64 GB kit contains four 16 GB registered DIMMs built for workstation platforms that require ECC integrity. Each module runs at DDR5 5600 with CL40 timings and a 1.25 V operating voltage. The quad-channel population fills four slots at once, delivering high bandwidth for memory-intensive workloads.
Registered DDR5 modules operate at 1.25 V, keeping power draw modest under sustained compute loads. The integrated heatspreader dissipates heat across the PCB so temperatures remain stable during long renders or simulations. No active cooling is required; typical case airflow is sufficient for normal operation.
The 288-pin RDIMM form factor fits standard DDR5 server and workstation motherboards that support registered ECC memory. Intel XMP 3.0 allows the rated speed and timings to be applied with a single BIOS setting. Kits scale from 64 GB up to 256 GB, leaving headroom for future capacity expansion.
| Brand | CORSAIR |
|---|---|
| Series | WS RDIMM Series |
| Part Number | CMA64GX5M4B5600C40 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL40 |
| Timing | 40-40-40-77 |
| Voltage | 1.25V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | INTEL XMP 3.0 |
| Features | Designed for Workstations: High-performance, reliable DDR5 memory designed for high-end workloads and applications. Intel XMP Compatible ECC RDIMMs: Complete tasks quicker thanks to high-frequencies and tight timings with ECC Registered DDR5 Memory. Rigorously tested: Carefully selected and screened modules ensure you can reliably reach the performance you need. Maximize installed memory: Get the most from your workstation with kits available from 64GB all the way up to 256GB. Simple Setup with Intel XMP 3.0: Easily set your memory to its rated speed and performance with a simple BIO |
| Prepravná hmotnosť | 0.09 kg |
| Rozmery balenia | 160 × 78 × 20 mm |
Align the notch on each 288-pin DDR5 RDIMM with the slot key, press firmly until both retention clips click, then enable Intel XMP 3.0 in BIOS so the kit runs at DDR5 5600 CL40 instead of the default JEDEC speed.
No routine maintenance is required; the modules are screened for stability at 1.25V. If a module fails, replace it with an identical 16GB DDR5 5600 CL40 registered ECC stick to keep quad-channel timing 40-40-40-77 intact.
The CAS latency CL40 and 40-40-40-77 timing set the latency floor; under continuous load the 1.25V operating voltage and registered buffer keep signal integrity stable up to the rated DDR5 5600 speed.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?