BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Corsair
64 GB quad-channel DDR5 kit with four 16 GB ECC registered modules running at 5600 MT/s CL40 and 1.25 V
This 64 GB kit contains four 16 GB registered DIMMs built for workstation platforms that require ECC integrity. Each module runs at DDR5 5600 with CL40 timings and a 1.25 V operating voltage. The quad-channel population fills four slots at once, delivering high bandwidth for memory-intensive workloads.
Registered DDR5 modules operate at 1.25 V, keeping power draw modest under sustained compute loads. The integrated heatspreader dissipates heat across the PCB so temperatures remain stable during long renders or simulations. No active cooling is required; typical case airflow is sufficient for normal operation.
The 288-pin RDIMM form factor fits standard DDR5 server and workstation motherboards that support registered ECC memory. Intel XMP 3.0 allows the rated speed and timings to be applied with a single BIOS setting. Kits scale from 64 GB up to 256 GB, leaving headroom for future capacity expansion.
| Brand | CORSAIR |
|---|---|
| Series | WS RDIMM Series |
| Part Number | CMA64GX5M4B5600C40 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL40 |
| Timing | 40-40-40-77 |
| Voltage | 1.25V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | INTEL XMP 3.0 |
| Features | Designed for Workstations: High-performance, reliable DDR5 memory designed for high-end workloads and applications. Intel XMP Compatible ECC RDIMMs: Complete tasks quicker thanks to high-frequencies and tight timings with ECC Registered DDR5 Memory. Rigorously tested: Carefully selected and screened modules ensure you can reliably reach the performance you need. Maximize installed memory: Get the most from your workstation with kits available from 64GB all the way up to 256GB. Simple Setup with Intel XMP 3.0: Easily set your memory to its rated speed and performance with a simple BIO |
| 配送重量 | 0.09 kg |
| 梱包サイズ | 160 × 78 × 20 mm |
Align the notch on each 288-pin DDR5 RDIMM with the slot key, press firmly until both retention clips click, then enable Intel XMP 3.0 in BIOS so the kit runs at DDR5 5600 CL40 instead of the default JEDEC speed.
No routine maintenance is required; the modules are screened for stability at 1.25V. If a module fails, replace it with an identical 16GB DDR5 5600 CL40 registered ECC stick to keep quad-channel timing 40-40-40-77 intact.
The CAS latency CL40 and 40-40-40-77 timing set the latency floor; under continuous load the 1.25V operating voltage and registered buffer keep signal integrity stable up to the rated DDR5 5600 speed.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?