Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Silver 3.5 inch SAS hard drive with black caddy tray

DELL

DELL ST3300555SS 300GB 15000RPM SAS 3.5in internal hard drive

SKU CH-88XP-GFQ7F

A 300GB 15000RPM SAS hard drive with a 16MB buffer and included 3.5in hot-swap tray

  • 300 GB capacity stores large server datasets
  • 15000 RPM spindle delivers fast transaction throughput
  • 3 Gb/s SAS interface connects to compatible controllers
  • 16 MB cache buffers burst I/O workloads
  • Hot-swap tray enables drive replacement without downtime

Dell 300 GB 15 000 RPM SAS drive

The Dell ST3300555SS is a new 3.5-inch internal hard drive with a 300 GB capacity and a 15 000 RPM spindle speed. It connects through a SAS 3 Gb/s interface and provides a 16 MB cache buffer. The package includes an R Series caddy for hot-swap installation in compatible bays.

Suits servers and storage arrays needing fast SAS

This drive fits servers and direct-attached storage arrays that accept 3.5-inch hot-swap SAS trays and benefit from 15 000 RPM access speeds. Systems limited to slower interfaces or fixed-mount bays without hot-swap support cannot take advantage of the supplied caddy and interface. Buyers needing larger single-drive capacity or solid-state latency should consider other storage types.

SAS 3 Gb/s interface and hot-swap tray

The single specification that determines compatibility is the SAS 3 Gb/s interface combined with the included R Series hot-swap tray. The host backplane or controller must support 3.5-inch SAS drives at 3 Gb/s and accept the Dell caddy form factor for the drive to install and operate correctly.

Prednosti

  • 300 GB capacity stores large server datasets
  • 15000 RPM spindle delivers fast transaction throughput
  • 3 Gb/s SAS interface connects to compatible controllers
  • 16 MB cache buffers burst I/O workloads
  • Hot-swap tray enables drive replacement without downtime

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How do I install the ST3300555SS with its included R Series caddy in a hot-swap SAS bay?

Slide the drive into the supplied R Series caddy until the connector engages, then insert the assembly into a 3.5" SAS hot-swap bay until the latch clicks; the 3Gb/s SAS interface seats automatically.

What maintenance will the 15000RPM SAS drive require over time?

No scheduled maintenance is needed; monitor SMART attributes for reallocated sectors or rising seek errors, and replace the unit if the 16MB cache area reports uncorrectable read failures.

Which limit appears first during sustained writes on the 300GB 15000RPM mechanism?

The 3Gb/s SAS interface caps sustained throughput before the 15000RPM platters reach their maximum media transfer rate.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.