BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
G.SKILL
A 32 GB dual-channel DDR5 kit running at 6800 MT/s with CL34 timing, 1.40 V operation and a 33 mm low-profile heat spreader for tight builds
This G.SKILL Ripjaws S5 kit delivers 32GB of DDR5 memory across two 16GB modules rated at 6800 MT/s with CL34 timings. It targets DIY builders and enthusiasts who want high-speed desktop memory with a low-profile heat spreader. The dual-channel kit uses 288-pin DIMMs and runs at 1.40V when the XMP 3.0 profile is enabled.
The modules measure 33mm tall, a single specification that decides fitment in compact cases or under large CPU coolers. Buyers should verify their cooler clearance against this height before ordering. The black aluminum heat spreader covers the hand-screened ICs validated by G.SKILL for stability at the rated speed.
This kit is recommended for Intel 700 series chipsets paired with 13th Generation Intel Core desktop processors. Systems on other platforms may boot at SPD speeds but will not reach the rated 6800 MT/s without manual tuning. The Red Dot Design Award 2022 recognises the minimalist matte-black styling.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws S5 Series |
| Model | F5-6800J3445G16GX2-RS5K |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6800 (PC5 54400) |
| CAS Latency | CL34 |
| Timing | 34-45-45-108 |
| Voltage | 1.40V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | "Performance DDR5 memory designed for DIY and PC enthusiasts. Featuring a 33mm Low-profile module height design Intel XMP 3.0 Support. The memory kit will boot at the SPD speed when BIOS settings are at default. For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues. Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit. Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard |
| Recommend Use | Intel 700 Series Chipset 13th Gen Intel Core Desktop Processors |
| LED Color | None |
| Prepravná hmotnosť | 0.14 kg |
| Rozmery balenia | 220 × 144 × 15 mm |
The Ripjaws S5 kit uses a low-profile 33 mm heat spreader, which fits under most large air coolers. Verify your cooler's RAM clearance specification to be certain.
Enable the Intel XMP 3.0 profile in the motherboard BIOS. At default settings the kit will run at the standard SPD speed instead.
Yes, the kit is validated for 13th Gen Intel Core desktop CPUs paired with Intel 700 series chipsets.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?