Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two matte black low profile DDR5 modules 33mm high

G.SKILL

G.SKILL Ripjaws S5 32GB (2×16GB) DDR5 6800 CL34 desktop RAM F5-6800J3445G16GX2-RS5K

SKU CH-EVHM-4C6X0 MPN F5-6800J3445G16GX2-RS5K

A 32 GB dual-channel DDR5 kit running at 6800 MT/s with CL34 timing, 1.40 V operation and a 33 mm low-profile heat spreader for tight builds

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 6800 (PC5 54400)
  • CAS LatencyCL34
  • Timing34-45-45-108
  • Voltage1.40V
  • DDR5 6800 speed accelerates demanding workloads and gaming
  • CL34 latency sharpens responsiveness in latency-sensitive applications
  • 33 mm low-profile height clears large CPU coolers easily
  • Dual-channel 32 GB kit enables smooth multitasking headroom
  • Red Dot 2022 award recognises the minimalist matte-black design

Ripjaws S5 DDR5 6800 kit

This G.SKILL Ripjaws S5 kit delivers 32GB of DDR5 memory across two 16GB modules rated at 6800 MT/s with CL34 timings. It targets DIY builders and enthusiasts who want high-speed desktop memory with a low-profile heat spreader. The dual-channel kit uses 288-pin DIMMs and runs at 1.40V when the XMP 3.0 profile is enabled.

33mm low-profile height

The modules measure 33mm tall, a single specification that decides fitment in compact cases or under large CPU coolers. Buyers should verify their cooler clearance against this height before ordering. The black aluminum heat spreader covers the hand-screened ICs validated by G.SKILL for stability at the rated speed.

Intel 700 series and 13th Gen Core

This kit is recommended for Intel 700 series chipsets paired with 13th Generation Intel Core desktop processors. Systems on other platforms may boot at SPD speeds but will not reach the rated 6800 MT/s without manual tuning. The Red Dot Design Award 2022 recognises the minimalist matte-black styling.

Pluspunten

  • DDR5 6800 speed accelerates demanding workloads and gaming
  • CL34 latency sharpens responsiveness in latency-sensitive applications
  • 33 mm low-profile height clears large CPU coolers easily
  • Dual-channel 32 GB kit enables smooth multitasking headroom
  • Red Dot 2022 award recognises the minimalist matte-black design

Specificaties

BrandG.SKILL
SeriesRipjaws S5 Series
ModelF5-6800J3445G16GX2-RS5K
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR5 6800 (PC5 54400)
CAS LatencyCL34
Timing34-45-45-108
Voltage1.40V
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack
Heat SpreaderYes
Features"Performance DDR5 memory designed for DIY and PC enthusiasts.
Featuring a 33mm Low-profile module height design
Intel XMP 3.0 Support.
The memory kit will boot at the SPD speed when BIOS settings are at default.
For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues.
Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit.
Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard
Recommend UseIntel 700 Series Chipset
13th Gen Intel Core Desktop Processors
LED ColorNone
Verzendgewicht0.14 kg
Pakketafmetingen220 × 144 × 15 mm

Vragen over dit artikel

Will the 33 mm module height clear a large CPU cooler?

The Ripjaws S5 kit uses a low-profile 33 mm heat spreader, which fits under most large air coolers. Verify your cooler's RAM clearance specification to be certain.

What BIOS setting enables the rated 6800 MT/s speed?

Enable the Intel XMP 3.0 profile in the motherboard BIOS. At default settings the kit will run at the standard SPD speed instead.

Is this dual-channel kit compatible with 13th Gen Intel Core processors on a 700-series chipset?

Yes, the kit is validated for 13th Gen Intel Core desktop CPUs paired with Intel 700 series chipsets.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.