Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two black DDR4 modules with low-profile aluminum heatspreaders, 42mm tall, dual-channel 32GB kit

G.SKILL

G.SKILL Ripjaws V F4-4000C18D-32GVK 32GB (2×16GB) DDR4 4000 CL18 desktop RAM

SKU CH-Z7B5-9TSQB MPN F4-4000C18D-32GVK

Dual-channel 32 GB kit with two 16 GB DDR4 modules rated at 4000 MT/s, CL18 timing and 1.40 V

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 4000 (PC4 32000)
  • CAS LatencyCL18
  • Timing18-22-22-42
  • Voltage1.40V
  • 32 GB dual-channel kit gives headroom for heavy multitasking
  • DDR4 4000 MT/s with CL18 timing speeds up data-intensive workloads
  • 40 V operation enables stable overclocks via Intel XMP 2.0
  • 42 mm low-profile heatspreaders clear most oversized CPU coolers
  • Tested on major motherboard brands for broad compatibility and reliability

Ripjaws V 32 GB DDR4 Kit

The G.SKILL Ripjaws V F4-4000C18D-32GVK provides 32 GB of DDR4 memory in a matched dual-channel kit of two 16 GB modules. It runs at 4000 MT/s with a CAS latency of 18 and timings of 18-22-22-42 at 1.40 V. The kit targets enthusiasts building or upgrading Intel Z590, Z490 or AMD X570 platforms for gaming and content creation.

288-Pin Unbuffered DIMMs for Dual Channel

Each module uses the standard 288-pin DDR4 form factor and is unbuffered and non-ECC. The kit is validated for Intel XMP 2.0, so the rated speed and timings load with a single BIOS setting. The 42 mm module height clears most oversized CPU coolers. Do not mix this kit with other memory kits; it is sold as a matched pair for reliable dual-channel operation.

Aluminium Heatspreader at 1.40 V

Black aluminium heatspreaders pull heat away from the DRAM during sustained loads at 1.40 V. The low-profile design keeps airflow unrestricted around the CPU cooler area. With no active lighting or moving parts, the modules add no audible noise to the system. Power draw scales with the 1.40 V operating voltage and the 4000 MT/s data rate under typical workloads.

Prednosti

  • 32 GB dual-channel kit gives headroom for heavy multitasking
  • DDR4 4000 MT/s with CL18 timing speeds up data-intensive workloads
  • 40 V operation enables stable overclocks via Intel XMP 2.0
  • 42 mm low-profile heatspreaders clear most oversized CPU coolers
  • Tested on major motherboard brands for broad compatibility and reliability

Špecifikácie

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-4000C18D-32GVK
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR4 4000 (PC4 32000)
CAS LatencyCL18
Timing18-22-22-42
Voltage1.40V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderYes
FeaturesOverclock performance DDR4 memory designed for compatible Intel platforms.
Sleek and stylish aluminum heatspreader design.
Intel XMP 2.0 support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the
Recommend UseAMD X570
Intel Z590 / Z490
Prepravná hmotnosť0.12 kg
Rozmery balenia216 × 140 × 16 mm

Otázky k tomuto produktu

Will the 1.40V voltage limit headroom for long gaming sessions?

The kit runs at 1.40V with CL18 18-22-22-42 timings; sustained loads stay within the rated voltage so the aluminium heatspreader handles the heat without extra cooling.

How loud or hot do the modules get after hours at 4000 MT/s?

No fans are present — the 42 mm tall black aluminium spreader dissipates heat silently, so noise stays at zero and temperatures remain acceptable for typical desktop airflow.

Which motherboard and CPU combination do I need to run this DDR4 4000 kit at rated speed?

Enable Intel XMP 2.0 on a Z590 or Z490 board with a compatible Intel CPU, or use an AMD X570 platform that supports the 4000 MT/s data rate.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.