BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
G.SKILL
Dual-channel 32 GB kit with two 16 GB DDR4 modules rated at 4000 MT/s, CL18 timing and 1.40 V
The G.SKILL Ripjaws V F4-4000C18D-32GVK provides 32 GB of DDR4 memory in a matched dual-channel kit of two 16 GB modules. It runs at 4000 MT/s with a CAS latency of 18 and timings of 18-22-22-42 at 1.40 V. The kit targets enthusiasts building or upgrading Intel Z590, Z490 or AMD X570 platforms for gaming and content creation.
Each module uses the standard 288-pin DDR4 form factor and is unbuffered and non-ECC. The kit is validated for Intel XMP 2.0, so the rated speed and timings load with a single BIOS setting. The 42 mm module height clears most oversized CPU coolers. Do not mix this kit with other memory kits; it is sold as a matched pair for reliable dual-channel operation.
Black aluminium heatspreaders pull heat away from the DRAM during sustained loads at 1.40 V. The low-profile design keeps airflow unrestricted around the CPU cooler area. With no active lighting or moving parts, the modules add no audible noise to the system. Power draw scales with the 1.40 V operating voltage and the 4000 MT/s data rate under typical workloads.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws V Series |
| Model | F4-4000C18D-32GVK |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 4000 (PC4 32000) |
| CAS Latency | CL18 |
| Timing | 18-22-22-42 |
| Voltage | 1.40V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible Intel platforms. Sleek and stylish aluminum heatspreader design. Intel XMP 2.0 support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the |
| Recommend Use | AMD X570 Intel Z590 / Z490 |
| 配送重量 | 0.12 kg |
| 梱包サイズ | 216 × 140 × 16 mm |
The kit runs at 1.40V with CL18 18-22-22-42 timings; sustained loads stay within the rated voltage so the aluminium heatspreader handles the heat without extra cooling.
No fans are present — the 42 mm tall black aluminium spreader dissipates heat silently, so noise stays at zero and temperatures remain acceptable for typical desktop airflow.
Enable Intel XMP 2.0 on a Z590 or Z490 board with a compatible Intel CPU, or use an AMD X570 platform that supports the 4000 MT/s data rate.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?