NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
GIGABYTE
Liquid-cooled RTX 5090 GPU with 32 GB GDDR7 memory, 21760 CUDA cores, 512-bit bus, PCIe 5.0 and DLSS 4.5 support
The GIGABYTE AORUS GeForce RTX 5090 XTREME WATERFORCE 32G is a liquid-cooled graphics card built around the NVIDIA Blackwell architecture. It delivers 32GB of GDDR7 memory on a 512-bit bus with a 2655 MHz core clock. The integrated WATERFORCE all-in-one cooler uses a 360mm radiator, three 120mm ARGB fans, liquid metal thermal grease and server-grade thermal gel. It targets enthusiasts and professionals who need maximum GPU compute and memory capacity for 4K or 8K workloads.
This card replaces any air-cooled RTX 40-series or earlier flagship when thermal headroom and memory capacity are the limiting factors. The jump is worth it if your current GPU hits temperature limits, lacks the 32GB frame buffer for large datasets or cannot saturate a PCIe 5.0 x16 link. The 28 Gbps memory speed and 21760 CUDA cores provide a measurable uplift for rasterisation, ray-traced rendering and AI inference workloads that exceed 24GB VRAM.
Verify your case can mount a 360mm radiator with 460mm tube routing clearance. Confirm the power supply delivers at least 1000W and includes a native 12V-2x6 connector or use the supplied 12V-2x6 to 4x PCIe 8-pin adapter. Ensure the motherboard provides a PCIe 5.0 x16 slot and that the 245mm card length fits without obstructing other components. Check DisplayPort 2.1b or HDMI 2.1b monitor compatibility for 7680x4320 output.
Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.
The card measures 245 mm long, 146 mm wide and 36 mm thick. The 360 mm radiator needs three 120 mm fan mounts. Tubes are 460 mm long with a 1.5 % tolerance, so measure your case clearance and radiator mounting points before buying.
Plug the single 16 pin connector directly into the card. Use the included 12V-2x6 to 4x PCIe 8pin adapter only if your PSU lacks a native 16 pin cable. Connect all four 8 pin plugs to separate PSU cables, not daisy-chained, to meet the 1000 W recommendation.
The liquid metal and server-grade gel are factory-applied and sealed inside the closed WATERFORCE loop. No user servicing is required. Only inspect the three 120 mm ARGB fans for dust buildup every few months and clean them with compressed air if needed.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?