Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Silver 2U rackmount chassis with four rear-access nodes and twenty-four 2.5-inch hot-swap drive bays

GIGABYTE

GIGABYTE H262-Z61 2U 4-Node Barebone Server 24-Bay

SKU CH-CM0M-TZWE2 MPN H262-Z61

A 2U rackmount barebone housing four independent server nodes with 24 hot-swap 2.5" SATA/SAS bays, dual AMD EPYC sockets per node, 16 DDR4 DIMM slots per node and dual 1 Gigabit LAN per node

  • Form Factor2U Rackmount
  • WorkloadHigh Density Server
  • CPU TypeSupports AMD EPYC 7002 series processor family Compatible wi
  • CPU SocketSocket SP3
  • Installed CPUNo CPU Installed
  • Max Processors2 per node (4 node)
  • Four compute nodes in 2U rack height
  • Dual AMD EPYC 7002 or 7003 processors per node
  • 64 DDR4 3200 DIMM slots across system
  • 24 hot-swap 2.5" SATA or SAS drive bays
  • Intel I350 dual 1 Gigabit LAN per node

High-Density 2U 4-Node Server

The GIGABYTE H262-Z61 is a 2U rackmount barebone that fits four independent dual-socket nodes into a single chassis. Each node accepts two AMD EPYC processors on Socket SP3, targeting workloads that demand high compute density such as big-data analytics, HPC clusters and cloud infrastructure. The system arrives without CPUs, memory or storage installed.

Verify Power, Cooling and CPU TDP Limits

Before ordering, confirm that your rack can supply sufficient power and airflow for four dual-processor nodes in a 2U space. Each node supports EPYC 7001 and 7002 series CPUs with a maximum TDP of 155 W; note that installing an M.2 device on a node reduces that CPU TDP ceiling. You must also source a compatible SAS controller card if you plan to use SAS drives in the hot-swap bays.

Management and Expansion Included

The bundle provides an Aspeed AST2500 BMC with a browser-based GUI, HTML5 iKVM remote console and Redfish RESTful API for third-party integration. Per node you gain two low-profile PCIe 4.0 x16 slots, one OCP 2.0 mezzanine slot with PCIe 3.0 x16 bandwidth and four dedicated 1 GbE management ports plus a global CMC port. Twenty-four 2.5-inch SATA/SAS hot-swap bays and dual M.2 slots per node complete the on-board expansion.

Prednosti

  • Four compute nodes in 2U rack height
  • Dual AMD EPYC 7002 or 7003 processors per node
  • 64 DDR4 3200 DIMM slots across system
  • 24 hot-swap 2.5" SATA or SAS drive bays
  • Intel I350 dual 1 Gigabit LAN per node

Špecifikácie

BrandGIGABYTE
ModelH262-Z61
Form Factor2U Rackmount
WorkloadHigh Density Server
CPU TypeSupports AMD EPYC 7002 series processor family
Compatible with AMD EPYC 7001 series processor family
CPU SocketSocket SP3
Installed CPUNo CPU Installed
Max Processors2 per node (4 node)
Memory Slots16 x DIMM slots per node (4 node)
Installed Memory SizeNo Memory Installed
Memory Type SupportedDDR4 3200
Channel Supported8 Channel
Installed HDDNo Storage Installed
M.22 x M.2 slots from CPU_0 and CPU_1 per node (4 node):
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards
- CPU TDP is limited to 155W if using M.2 device
GPU/VPUAspeed AST2500
PCI ExpressPer node (4 node):
2 x Low profile half-length slots with PCIe x16 (Gen4 x16 bus) from CPU_0
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bandwidth from CPU_0 (Type1, P1, P2, P3, P4 with NCSI supported)
First LANIntel I350-AM2 per node (4 node)
Max. LAN Speed1 Gigabit
Hot-Swap BaysPer node (4 node):
6 x 2.5" SAS/SATA hot-swappable HDD/SSD bays
SAS card is required for SAS devices support
VGA1 per node (4 node)
Rear USB2 x USB 3.0 per node (4 node)
RJ451 x 10/100/1000 *CMC global management port
*CMC: Chassis Management Controller, to monitor all status of computing nodes
Per node (4 node)
2 x 1GbE LAN ports (1 x Intel I350-AM2)
1 x Dedicated management port
Other PortsInternal I/O per node (4 node)
2 x M.2 slots
1 x COM header
1 x TPM header
1 x BMC SGPIO header
1 x JTAG BMC header
1 x PLD header
1 x Clear CMOS jumper
1 x IPMB connector
Max. Power2 x 2200W redundant PSUs, 80 PLUS Platinum
Dimensions17.32" x 3.44" x 33.07"
Package Contents1 x H262-Z61
8 x CPU heatsinks
1 x Rail Kit
Prepravná hmotnosť35.38 kg
Rozmery balenia1168 × 711 × 330 mm

Otázky k tomuto produktu

What components are included with the H262-Z61 barebone and what must be purchased separately?

The 2U 4-node chassis includes the Aspeed AST2500 GPU/VPU, Intel I350-AM2 LAN per node, 24 hot-swap 2.5" SATA/SAS bays, M.2 slots, PCIe slots and OCP mezzanine. CPUs, DDR4 memory, storage drives and SAS controller cards are not installed and must be bought separately.

Which AMD EPYC processor series should I select for the Socket SP3 nodes?

The system supports AMD EPYC 7001, 7002 and 7003 series processors in Socket SP3. Each node accepts up to two CPUs with a 155 W TDP limit when M.2 devices are used.

What does the 24-bay figure mean for storage configuration in a live deployment?

Each of the four nodes provides six 2.5" hot-swappable bays for SATA or SAS SSDs and HDDs, giving 24 bays total. SAS drives require a separately purchased SAS controller card.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.