Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
HP Mini SAS SFF-8087 cable 20 inch straight connectors

HP

HP 654073-001 Mini SAS SFF-8087 20 inch cable

SKU CH-4J0Q-25K3Y

A 20-inch Mini SAS SFF-8087 cable connects internal storage devices in HP ProLiant servers

  • 20 inch length fits tight server chassis
  • Mini SAS SFF-8087 connectors link HP ProLiant storage
  • 1 unit weight simplifies cable management
  • SAS interface supports direct-attached drive arrays

HP Mini SAS SFF-8087 cable for ProLiant servers

This 20 inch cable connects internal storage devices using the Mini SAS SFF-8087 interface. It is designed for HP ProLiant server configurations that require a direct SAS link between a controller and a backplane or drive cage. The part number 654073-001 identifies the specific assembly for compatible HP systems.

Passive cable with no active cooling or power draw

As a passive copper assembly, the cable generates no heat and produces no audible noise during operation. It draws no electrical power beyond the signal transmission between connected SAS ports. The lightweight construction at 5.1 units adds negligible strain to drive cage connectors or controller brackets.

Prednosti

  • 20 inch length fits tight server chassis
  • Mini SAS SFF-8087 connectors link HP ProLiant storage
  • 1 unit weight simplifies cable management
  • SAS interface supports direct-attached drive arrays

Špecifikácie

BrandHP

Otázky k tomuto produktu

How do I connect the HP 654073-001 Mini SAS SFF-8087 cable to my server backplane?

Align the keyed SFF-8087 connector with the port on the backplane and press firmly until the latch clicks; the 20 inch length is designed for short internal runs so avoid sharp bends near the plug.

When should I replace the HP 654073-001 cable in a production server?

Replace it if the latch no longer holds, if you see cracked insulation or bent pins on the SFF-8087 ends, or after any chassis maintenance that may have stressed the 20 inch run.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.