Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

HP

HP 654073-001 Mini SAS SFF-8087 20 inch cable

SKU CH-4J0Q-25K3Y

A 20-inch Mini SAS SFF-8087 cable connects internal storage devices in HP ProLiant servers

  • 20 inch length fits tight server chassis
  • Mini SAS SFF-8087 connectors link HP ProLiant storage
  • 1 unit weight simplifies cable management
  • SAS interface supports direct-attached drive arrays

HP Mini SAS SFF-8087 cable for ProLiant servers

This 20 inch cable connects internal storage devices using the Mini SAS SFF-8087 interface. It is designed for HP ProLiant server configurations that require a direct SAS link between a controller and a backplane or drive cage. The part number 654073-001 identifies the specific assembly for compatible HP systems.

Passive cable with no active cooling or power draw

As a passive copper assembly, the cable generates no heat and produces no audible noise during operation. It draws no electrical power beyond the signal transmission between connected SAS ports. The lightweight construction at 5.1 units adds negligible strain to drive cage connectors or controller brackets.

Pluspunten

  • 20 inch length fits tight server chassis
  • Mini SAS SFF-8087 connectors link HP ProLiant storage
  • 1 unit weight simplifies cable management
  • SAS interface supports direct-attached drive arrays

Specificaties

BrandHP

Vragen over dit artikel

How do I connect the HP 654073-001 Mini SAS SFF-8087 cable to my server backplane?

Align the keyed SFF-8087 connector with the port on the backplane and press firmly until the latch clicks; the 20 inch length is designed for short internal runs so avoid sharp bends near the plug.

When should I replace the HP 654073-001 cable in a production server?

Replace it if the latch no longer holds, if you see cracked insulation or bent pins on the SFF-8087 ends, or after any chassis maintenance that may have stressed the 20 inch run.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.