Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Silver 2.5 inch SAS hard drive with green circuit board visible

HPE

HPE 583711-001 300 GB 2.5" 10000 rpm SAS internal hard drive

SKU CH-RDQ7-RZRP6

A 300 GB internal SAS hard drive spinning at 10000 rpm in a 2.5 inch form factor for storage systems

  • 300 GB capacity stores more data
  • 10,000 rpm spindle speed accelerates read and write operations
  • 6 Gb/s SAS interface delivers high-throughput connectivity
  • 5-inch form factor fits dense server bays
  • Compatible with HP M6625 drive enclosure for direct integration

Product identity and audience

The HPE 583711-001 is a 300 GB internal hard drive with a 2.5 inch form factor. It connects through a 6Gb/s SAS interface and spins at 10000 rpm. The drive is built for HP M6625 2.5-inch SAS drive enclosures and storage systems. It suits administrators who need a replacement or expansion drive for those specific platforms.

Thermals noise and power

Mechanical drives of this class produce audible seek noise and vibration during normal operation. The 10000 rpm spindle speed generates more heat than slower disks, so the enclosure must provide adequate airflow across the drive body. Power draw follows the SAS 6Gb/s specification for 2.5 inch devices. No additional cooling or power details are supplied by the manufacturer.

Deciding specification

The single specification that determines fit is the 6Gb/s SAS interface combined with the 2.5 inch form factor. Only systems that accept a 2.5 inch SAS drive at this signalling rate can use the product. Buyers whose enclosures require a different interface or a 3.5 inch bay cannot install this drive.

Prednosti

  • 300 GB capacity stores more data
  • 10,000 rpm spindle speed accelerates read and write operations
  • 6 Gb/s SAS interface delivers high-throughput connectivity
  • 5-inch form factor fits dense server bays
  • Compatible with HP M6625 drive enclosure for direct integration

Špecifikácie

BrandHPE

Otázky k tomuto produktu

How do I install the 583711-001 drive in an HP M6625 enclosure, and what step is often missed?

Slide the 2.5" drive into the SAS bay until the connector seats firmly, then secure it with the enclosure's latch or screws; the step often missed is verifying the 6Gb/s SAS link speed in the controller BIOS after power-on.

What maintenance or replacement will the 300 GB 10000 rpm SAS drive need later?

The drive has no user-serviceable parts; plan to replace the unit when SMART attributes report reallocated sectors or when the enclosure's monitoring software flags a predictive failure.

What limit appears first on the 583711-001 during sustained write workloads?

The 6Gb/s SAS interface caps sustained throughput, so the bus saturates before the 10000 rpm platters reach their maximum media transfer rate.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.