Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Single 2.5 inch SAS hard drive in HPE Smart Carrier tray

HPE

HPE EG1800JEHMD 1.8TB 10000RPM SAS 2.5in internal hard drive

SKU CH-FVH6-C3WMK

Stores 1.8 TB on a 10 000 RPM 12 Gb/s SAS drive with a Smart Carrier tray included

  • High capacity storage with 1.8TB for demanding workloads
  • Fast data access from 10000RPM rotational speed
  • High throughput via SAS 12Gb/s interface
  • Compact 2.5in form factor fits dense server bays
  • Includes Smart Carrier caddy for tool-less installation

Enterprise 2.5-inch SAS drive

This HPE EG1800JEHMD is a 1.8TB internal hard drive spinning at 10000RPM with a 12Gbps SAS interface. It ships as a lot of 10 units, each supplied with a Smart Carrier caddy for direct installation in compatible bays. The drives are new and intended for enterprise storage arrays or servers that accept 2.5-inch SAS devices.

Suited for high-IOPS arrays.

The 10000RPM spindle speed and 12Gbps SAS link favour workloads that demand low latency and high random I/O, such as transactional databases or virtualisation hosts. Buyers who need more capacity per spindle or a different interface should evaluate alternative media. Desktop PCs and laptops without a SAS backplane cannot use these drives.

12Gbps SAS interface dictates compatibility

The drive connects exclusively through a 12Gbps SAS port, so the host controller, backplane and cabling must support that standard. Without a matching SAS infrastructure the drive will not function, regardless of physical fit. Verify the server or array specifications before purchase.

Prednosti

  • High capacity storage with 1.8TB for demanding workloads
  • Fast data access from 10000RPM rotational speed
  • High throughput via SAS 12Gb/s interface
  • Compact 2.5in form factor fits dense server bays
  • Includes Smart Carrier caddy for tool-less installation

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

What 2.5-inch drive bay and carrier does the EG1800JEHMD require?

The drive uses a standard 2.5-inch SAS form factor and ships with an HPE Smart Carrier caddy that locks directly into compatible server or storage bays.

How is the Smart Carrier installed, and what step is often missed?

Slide the drive into the carrier until the latch clicks, then insert the assembly into the bay until the release lever engages; the step often missed is confirming the lever is fully latched.

Which component will need replacement first under heavy 10000RPM workloads?

The mechanical spindle and actuator assembly inside the sealed helium‑free housing are the primary wear items and determine the drive’s service life.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.