Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Small black ATX power supply unit 16W

KHACHIMO

KHACHIMO IHTAA-16W 16W ATX power supply

SKU CH-FNBT-7WMGC

Compact 16W ATX power supply tested working for reliable low-power system builds

  • TypeATX
  • ATX form factor fits standard cases
  • 16 W output for low-power builds
  • Tested working before shipment
  • Good quality components for reliability
  • First listed by manufacturer March 12, 2024

Low-wattage ATX power supply

The KHACHIMO IHTAA-16W is a 16W ATX power supply intended for systems with extremely low power demands. It provides a basic ATX form factor connection for compatible motherboards and peripherals. The unit is supplied new and has been tested working by the manufacturer.

Suitable for ultra-low-power builds

This supply fits embedded PCs, thin clients or specialised industrial boards that draw minimal current from the ATX connector. It is not for standard desktop motherboards, discrete graphics cards or any configuration where total system draw can exceed the rated output. Builders needing headroom for additional drives or expansion cards should look elsewhere.

16W rated output

The single deciding specification is the 16W maximum power rating. If the complete system — including CPU, memory, storage and all onboard devices — stays within this limit, the unit will deliver the required ATX voltages. If the projected load is higher, a higher-wattage ATX supply must be chosen.

Prednosti

  • ATX form factor fits standard cases
  • 16 W output for low-power builds
  • Tested working before shipment
  • Good quality components for reliability
  • First listed by manufacturer March 12, 2024

Špecifikácie

TypeATX

Otázky k tomuto produktu

What ATX form factor does the IHTAA-16W use for case mounting?

The IHTAA-16W follows the standard ATX form factor, so it fits any chassis with an ATX power-supply cut-out and four rear mounting holes.

Which power connectors must be seated during installation to avoid a no-post condition?

Connect the 24-pin ATX main connector and the 4-pin or 8-pin CPU power connector firmly until each latch clicks; missing either will prevent the system from starting.

When should the internal fan be cleaned to maintain airflow in the IHTAA-16W?

Use compressed air to clear dust from the fan intake and exhaust every six to twelve months, or sooner in dusty environments, to keep cooling efficient.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.